Manual

How to use PIP's other features
B
D
B
PressPIP to place the PIP inseton the main screen.PressPIP againto
remove inset.
With PIPinset on, pressPIP ch to switch to PIP inset channelscan,
press PIP ch to returnchannel scanto the main screen.
With PIPinset on, press FREEZto freeze the image in the PIP inset,
press FREEZagain to resumemotion.
WITH PIP ON OPERATION_;
Audio Swap
With no other on-screen menus active, use the QUIT key to switch
sound between main picture and the PIP inset; the musical note shows
which audio is being heard.
PIP Swap
UseUp/Down arrowsto fLip PIP imagewith main picture.
ChanneLs
PressCHANNELUp/Down to change channelsin the PIPinset - - if the
source for the PIPinset is Antenna/CabLe.
If the source is other equipment connected to the Video1, or Video 2
jacks, tune channeLson that equipment.
PIP Inset Video Source
PressTV/VCRSOURCEto switch video sources for the PIPinset
between, Antenna/Cable,Video 1, or Video2 etc.
Hove PIP Inset around Screen
Use the Left/right arrows to move the PIP inset to a different [ocation
on the main screen.
[] With PIP on, pressFREEZ,the mainpictureimage will befrozen
ond placedinto the PIP inset. (Good,or writingdown phone num-
bersthat appearon-screen.)
TUNER
A/V SOURCE
Anydevicethat picksup broadcastsignaLsand turns them into picture and sound.
Other equipment connectedto the TVsourceinputson the TV backconnectionspane[; Video 1, Video 2,
S-Video 1, or S-Video2 etc.
(2-Tuner)2_,4e2 PA G E 4 1