Specifications

Page 8 of 16 801525 - Zip HydroTap Installation Instructions - Nov. 2013 - V1.00
Special Tools Required:
In addition to normal tools, the following will be required:
For the standard taps:
• 35mm diameter sheet metal hole punch for sink tops. (Not supplied)
• 35mm diameter hole saw for timber bench tops. (Not supplied)
• Nut runner tube spanner (supplied) for fixing tap assembly.
When installing a font unit, the following will be required:
• 108mm diameter sheet metal or hole saw to suit surface being cut.
Hole positioning:
Position the tap such that it dispenses into the sink
bowl with ample clearance for a cup or tea pot. Al-
ternatively, the tap could be mounted away from the
sink using a Zip Font, available as an accessory.
Section 1
Tap installation
35mm hole
116
Sink
HydroTap