Specifications
Page 6 of 16 801525 - Zip HydroTap Installation Instructions - Nov. 2013 - V1.00
Major components and accessories
Important Safety Instructions
WARNINGS
1.
The Zip HydroTap unit must be earthed. The resistance of the earth connection from each exposed
metal part must be less than 1 ohm.
2.
All Installation and service work must be completed by trained and suitably qualified Tradespeople.
Faulty operation due to unqualified persons working on this product, or any other Zip product may void
warranty coverage.
3.
All Plumbing must comply with AS/NZS3500.
4.
All Electrical must comply with AS/NZS3000
5.
All Plumbing and Electrical connections must be made in accordance with local regulations.
6.
This HydroTap product is rated for 230V 50Hz AC operation.
7.
Undersink units must never be located near, or cleaned with water jets.
8.
Zip HydroTaps are not to be exposed to the elements of nature
9.
Due to the process of continuous improvement, Zip Heaters reserves the right to change details
mentioned in this manual, without notice.
Parts supplied Description
1 off
HydroTap
Tap with hoses
1 off
HydroTap
Undersink Unit with
water filter
1 off
Mains water
connection hose
1 x Kickboard louvre
1 x Door vent louvre
1 x Front vent grill
1 x Air Duct
1 x Mounting plate
1 x User guide
1 x Installation
Instructions
Accessories Description
Font Kit
Replacement Filter
Disabled lever Kit
Guide