Service manual

3-6
*************************System Test Result**************************
01. System SDRAM Test------------------------------>OK
02. Flash Memory Test--------------------------------->OK
03. HD1 Test---------------------------------------------->OK
04. Audio Decoder Test-------------------------------->OK
05. HD1 DMA Test-------------------------------------->OK
06 .I2C EEPROM Test--------------------------------->OK
07. VSB Test---------------------------------------------->OK
08. TDA7440 Test--------------------------------------->OK
09. SAA7120 Test--------------------------------------->OK
10. I2C Tuner Test-------------------------------------->OK
11. PDR-PRO Test-------------------------------------->OK
12. IDE Device Test------------------------------------>OK
13. HDD Read/Write Test----------------------------->OK
14. Front Test--------------------------------------------->OK
System test is passed successfully
*************************************************************************
Screen shot during Test
• Display “Error” when any error is occurred
At this time, you can easily find out the problem by concentrating on the section where the error is occurred.
The troubleshooting method for the error by each section can be concretely read at the following section.