Instruction manual
23
ES
EN
DE
DISPLAY
You can press DISPLAY repeatedly during playback to display the elapsed and
remaining time. The display changes each time you press the button:
DVD: Title elapsed > Title remaining > Chapter elapsed >
Chapter remaining > Display off.
CD/VCD: Title elapsed > Title remaining > Total elapsed> Total remaining
>
Display off.
MP3/Xvid: Title elapsed >Title remaining > Display off.
Repeat functions
REPEAT
Press the REPEAT during playback. The repeat symbol appears and,
each time the button is pressed, the section to be repeated (the entry disap-
pears after a few seconds):
DVD: To move to the previous title or chapter
Audio-CD: Title> All > out;
MP3: Repeat title > Repeat album > Album > .... .
The
REPEAT-function is not possible for Video CDs and Xvid.
REPEAT A - B (DVD, Audio-CD)
You can repeat a section you have defined yourself.
During playback press the
A-B button to set the start of the repeat sequence.
The repeat symbol
appears with the addition A.
Press
A - B again to set the end of the repeat sequence. The display will show
A B. The defined sections will be repeated endlessly.
Press the
A-B button a third time to end the repeat sequence.
It is not possible to use the
REPEAT A-B function for MP3 and Xvid.
Program playback sequence - PROGRAM
The program function allows you to play up to 20 chapters (DVD) or titles (audio) in your own, defined
sequence.
Programming is not possible with MD3 media.
DVDs
Press PROGRAM. A table with spaces for programs appears on the
screen. The table contains titles and chapters. The title number on
the DVD appears in the header.
Use the remote control buttons to enter the number of the title se-
lected for the program place01 . Please place a 0 in front of single-
digit numbers. – When a title has been entered the number of chapters in this title will appear in the
header.
Use the remote control buttons to enter the desired chapter. Please place a 0 in front of single-digit
numbers. The cursor jumps to the program position 02.
Enter additional program places in the same way.
Audio CDs/VCD
Press the PROGRAM button. A table with spaces for programs ap-
pears on the screen. The number of titles on the CD is displayed in
the table header. The program position 01 is coloured.
Use the remote control buttons to enter the number of the title
selected for the program place01 . Please place a 0 in front of sin-
gle-digit numbers.