Owner`s manual

19
Safety instructions
Monitor Overview
Connections
Basic operation
Time setting
Picture & Sound
Special features
Others
PC Setup
- You can enjoy vivid picture and sound with connecting a PC with the Monitor.
• Press POWER button on the PC and press ON/OFF button
on the Monitor. After this press button on the Monitor or
press power on button on the remote control.
• Press video/pc button on the remote control to select
RGB.
• Set the resolution of PC under SXGA (1280x1024, 75Hz).
(Refer to page 20.)
video/pc
<On the remote control>
How to connect
How to use
Make the connections shown in the illustration below.
• Set the computer video output to under UXGA; for the best picture quality. (If the video output of
the PC is not compatible with the Monitor, no picture will appear on the Monitor. See page 20.)
• As shown below, connect the video output port of the PC to the Monitor RGB-PC
INPUT(VGA/SVGA/CGA/SXGA) RGB-DTV INPUT(480p/720p/1080i).
• Connect the audio out from the PC to the Audio jacks on the Monitor. (Audio cables not included
with the Monitor)
• If available, adjust PC sound to your preference.
• Select normal monitor to use as monitor because this monitor doesn’t supply plug & play function.
(+) ( ) (+)( )
AUDIO
(MONO)
R L VIDEO Y P
B R
P
AV INPUT
AUDIO
R L
R
L
EXTERNAL SPEAKER (8Ω) AC INPUTAUDIO INPUT S-VIDEO
COMPONENT (480i/480p/720p/1080i)
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
RGB-DTV INPUT
(480p/720p/1080i)
(DVD/DTV INPUT)
(+)
( )
(+)( )
AUDIO
(MONO)
R L
AV INPUT
COMPONENT (480i/480p/720p/1080i)
(DVD/DTV INPUT)
RGB-PC INPUT
R
AUDIO INPUT
S-VIDEO
EXTERNAL SPEAKER (8Ω)
R L
AC INPUT
L
AUDIO
(VGA/SVGA/XGA/SXGA)
RGB-DTV INPUT
(480p/720p/1080i)
VIDEO
Y P
B
P
R
Tips
• To avoid burning an image on the Monitor screen, don’t have a still picture on the screen
for a long period time.
<Back panel of the Monitor>