Model number : DPDP60W Serial number : PLASMA DISPLAY PANEL Please read this operating guide carefully before using the Monitor. Keep the operating guide with the Monitor. For future reference, write down the serial number on the back of the Monitor in the space provided below.
FCC NOTICE • DPDP60W : A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents First step WARNINGS ..............................................................4 SAFETY INSTRUCTIONS........................................5 Monitor Overview Front Panel Controls ................................................8 Connection Panel Overview .....................................9 Remote Control Key Functions/Accessories ..........10 Monitor Installation .................................................12 Equipment Connections and Setup VCR Setup............................
WARNINGS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety instructions Monitor Overview SAFETY INSTRUCTIONS Important safeguards for you and your new product 8. Transporting Product The safety and operating instructions should be retained for future reference. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 2. Follow Instructions 4. Heed Warnings Time setting 3.
SAFETY INSTRUCTIONS (Continued from previous page) The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power source indicated on the marking label.
19. Servicing 20. Damage Requiring Service 23. Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. The product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. 24. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Time setting Picture & Sound Special features a.
Front Panel Controls ON/OFF INPUT SELECT ON/OFF VOLUME Main power button Power standby indicator Illuminates red in standby mode Illuminates green when the Monitor is turned on INPUT SELECT VOLUME INPUT SELECT button Sub power button VOLUME (F,G) buttons Remote control sensor 8
Safety instructions Monitor Overview Connection Panel Overview Connections Basic operation R AUDIO L (MONO) VIDEO AV INPUT Y PB PR PR COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) (+) R ( ) R AUDIO L RGB-PC INPUT (VGA/SVGA/XGA/SXGA) RGB-DTV INPUT (480p/720p/1080i) AUDIO INPUT S-VIDEO ( ) L (+) EXTERNAL SPEAKER (8Ω) AC INPUT (+) R ( ) R AUDIO L RGB-PC INPUT (VGA/SVGA/XGA/SXGA) RGB-DTV INPUT (480p/720p/1080i) S-VIDEO ( ) L (+) EXTERNAL SPEAKER 8Ω AC INPUT Special featur
Remote Control Key Functions/Accessories - When using the remote control aim it at the remote control sensor on the Monitor. power on button sleep button (Refer to p .34) power on system off sleep mute mute button switches the sound on or off. 2 1 number buttons 3 5 4 6 8 7 9 video/pc menu 0 video/pc button up vol enter vol down pip button (Refer to p. 25) pip twin picture input select position input select button (Refer to p. 26, 29) ratio button (Refer to p.
Safety instructions Monitor Overview Connections INPUT SELECT button on the remote control system off button Each press of this button changes the mode as shown below. No function VIDEO COMPONENT Basic operation RGB menu button Time setting enter button up/down buttons vol buttons Picture & Sound twin picture button (Refer to p. 28) When pressed displays DW on screen. position button (Refer to p. 26) Special features freeze button (Refer to p. 42) easy sound button (Refer to p.
Monitor Installation - 1. It is recommended that this product only be used at an altitude of less than 6562 feet (2000m) to get the best quality picture and sound. ,,,,,, ,,,,,, ,,,,,, ,,,,,, - Your DPDP60W (Monitor) can be installed on a wall as shown below, or on a desktop pedestal as shown on the next page. Wall Mount Installation • The monitor can be installed on the wall as shown above.
Safety instructions Monitor Overview Desktop Pedestal Installation Connections Basic operation Time setting INPUT SELECT ON/OFF VOLUME Picture & Sound • The Monitor can be installed on a desk as shown above. (For further information, refer to the optional ‘Desktop Stand Installation and Setup Guide’.) Special features b. 4inch 4inch 1.18inch Others ( Pedestal mount minimum allowable clearances for adequate ventilation ) 4inch 2.
VCR Setup - As shown below, when connecting the Monitor to a VCR, match the colors of AV input jacks on the Monitor with the output jacks on the VCR: Video = yellow, Audio (Left) = white, Audio (Right) = red. - If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor. - If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.
Safety instructions Monitor Overview Cable TV Setup - After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
External AV Source Setup - As shown below, when connecting the Monitor to an external source, match the colors of AV input jacks on the Monitor with the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.
Safety instructions Monitor Overview DVD Setup How to connect a DVD (digital video disk player) • Connect DVD video inputs to Y, PB, PR of COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) and audio inputs to Audio sockets of AV INPUT.
DTV Setup - To watch digitally broadcast programs, purchase/connect a digital SET-TOP BOX. - You can select only the 16:9 picture format in DTV 720p/1080i mode. How to connect a user-supplied Digital Set-top Box • Connect DTV video inputs to Y, PB, PR of COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) or RGB-PC INPUT(VGA/SVGA/XGA/SXGA) RGB-DTV INPUT(480p/720p/1080i) socket and connect DTV audio inputs to Audio sockets of AV INPUT.
- You can enjoy vivid picture and sound with connecting a PC with the Monitor. How to connect (MONO) VIDEO AV INPUT Y PB PR (+) R ( ) R AUDIO L COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) RGB-PC INPUT (VGA/SVGA/XGA/SXGA) RGB-DTV INPUT (480p/720p/1080i) AUDIO INPUT S-VIDEO Basic operation R AUDIO L ( ) L (+) EXTERNAL SPEAKER (8Ω) Connections Make the connections shown in the illustration below. • Set the computer video output to under UXGA; for the best picture quality.
Monitor Image Display Specifications Resolution 640x350 720x400 640x480 800x600 832x624 1024x768 1152x864 1152x870 1280x960 1280x1024 20 Horizontal Vertical Frequency (KHz) Frequency (Hz) 31.468 37.861 31.469 37.927 31.469 35.000 37.861 37.500 43.269 45.913 53.011 64.062 35.156 37.879 48.077 46.875 53.674 56.000 64.016 49.725 48.363 56.476 60.023 68.677 54.348 63.995 67.500 77.487 68.681 60.000 75.000 63.981 79.976 70.09 85.08 70.08 85.03 59.94 66.66 72.80 75.00 85.00 90.03 100.04 120.00 56.25 60.
- Select RGB first, see page 11. menu Press the menu button to show menus on screen. 2 Press the up/down button to select menus. Connections 1 • Each press will cycle through the different menus as shown below.
PC Computer Mode Adjustments Auto adjustment - Automatically adjusts picture position and eliminates any image shaking. READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Press the up/down button to select SCREEN and then press the vol ( G ) button. up SPECIAL LANGUAGE ARC SCREEN SCREEN TRANSPARENCY PIP/DW G G G G G TO SET G vol down 2 Press the up/down button to select AUTO.CONFIG.
Safety instructions Monitor Overview Adjusting horizontal / vertical position - Only adjust V-POSITION and H-POSITION in DTV or component 480p/720p/1080i. READY menu Connections Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. up vol down Basic operation 1 Press the up/down button to select SCREEN and then press the vol ( G ) button.
PC Computer Mode Adjustments Picture Phase Adjustments • If the picture isn’t clear after auto adjustment and especially if the characters are still trembling, then adjust the picture phase manually. • When watching PIP/TWIN PICTURE, SCREEN is inactivated in special menu. READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Use the up/down button to select SCREEN and then press the vol ( G ) button.
Watching the PIP (Picture in Picture) pip • Each time you press pip or PIP size as below. PIP[S] Basic operation Press the pip button. vol button, you can change the PIP [L] Connections - Select RGB input source before pressing PIP. - This function works only in the following resolution; 640x480, 800x600, 1024x768 (only in Vertical frequency 60 Hz) - When you select RGB or DTV for main picture in PIP/Twin picture, you can watch video, cable TV or DVD for sub picture.
Selecting the source input signal input select Press the input select button in PIP mode. • Each time you press input select button, you toggle between VIDEO and COMPONENT. VIDEO COMPONENT COMPONENT source only works in 480i mode. PIP INPUT F VIDEO G Moving the Sub picture position Press the position button in PIP mode. • Each press of the position button will change the position of the sub picture on the screen as shown below.
Safety instructions Monitor Overview PIP function Selecting PIP sound options - This function only works with the following resolutions; 640x480, 800x600, 1024x768 (only in Vertical frequency 60 Hz) - To use this function, connect PC/DTV video output to RGB-PC INPUT(VGA/SVGA/XGA/SXGA) RGB-DTV INPUT (480p/720p/1080i) and connect PC/DTV audio outputs to AUDIO INPUT. - SOUND SELECT is always selected SOUND[M] regardless of prior sound choice.
Twin picture mode - Select RGB input source. - This function works only in the following resolutions; DTV 480p/720p/1080i, RGB 640x480 (only in Vertical frequency 60 Hz) - With TWIN PICTURE active, not all picture formats can be used for the main/sub picture. twin picture Press the twin picture button. • Each time you press select ON or OFF. twin picture or vol button, you can Main picture Sub picture DW F ON G • To avoid showing a fixed image on the screen, sub picture moves every 2 hours.
Safety instructions Monitor Overview Selecting a source for the Twin picture Connections input select Press the input select button in TWIN PICTURE mode. • Each time you press input select button, you toggle between VIDEO and COMPONENT. VIDEO COMPONENT Basic operation In case of COMPONENT, this function works only in 480i mode.
Using the remote control Installing batteries • Open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity, match “+” with “+”, and match “-” with “-”. • Install two 1.5V “AA” alkaline batteries. Don’t mix the used batteries with new batteries. Notes for using the remote control Make sure these are no objects between the remote control and its sensor. 30 Don’t place the remote control near a heater or damp place.
Safety instructions Monitor Overview Turning on the Monitor - When using the remote control, aim it at its sensor on the Monitor. Turning on the Monitor just after installation Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the or INPUT SELECT button on the Monitor or press the power on or video/pc button on the remote control and then the Monitor will be switched on. Basic operation 2 Connections 1 Connect power cord correctly.
Selecting language for the menus READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Press the up/down button to select LANGUAGE and then press the vol ( G ) button. SPECIAL LANGUAGE ARC SCREEN TRANSPARENCY PIP/DW G ˙–„ G ENGLISH ESPAÑOL PORTUGUÊS FRANÇAIS G G G up vol down 2 Press the up/down button to select the desired language. up down 3 Press the enter button.
Safety instructions Monitor Overview Checking features - Make sure to select VIDEO before operating. menu 2 Press the up/down button. Connections up 1 Press the menu button. • Each press will cycle through the menus shown below.
Setting Sleep Timer < Sleep Timer turns the Monitor off after a preset time > sleep Press the sleep button to set sleep time. Each time you press sleep button, the next preset setting time is changed as shown below. F --- G F 10 G F 20 G F 30 G F 120 G F 90 G F 60 G F 240 G F 180 G SLEEP F 30 G • To release sleep time setting, press the sleep or vol button repeatedly to select F --- G. • ‘ SLEEP 1’ is displayed, one minute before the Monitor is due to switch off.
Safety instructions Monitor Overview Auto picture control < Use APC to set the Monitor for the best picture appearance > - APC is not available in RGB, PIP/TWIN PICTURE modes. APC (Auto Picture Control) Connections apc Press the apc button. 2 Press the apc or vol button to select your desired picture condition. Basic operation 1 Time setting F CLEAR G Picture & Sound APC • Each press of vol button changes the screen display as shown below.
Adjusting picture appearance - PIP and Twin picture inset settings are not adjustable. READY Press the menu button and then press the up/down button to select PICTURE menu. Press the vol ( G ) button. menu up vol down 1 Press the up/down button to select CONTRAST and then press the vol ( G ) button. (in case of adjusting contrast) PICTURE APC DRP CONTRAST BRIGHTNESS COLOR TINT SHARPNESS G G 100 50 50 0 50 up vol down • Adjust BRIGHTNESS, COLOR, TINT and SHARPNESS in the same way.
< DRP allows you to select Clear or Soft for your picture appearance > - This function works in video, component 480i mode. READY Connections Press the menu button and then press the up/down button to select PICTURE menu. Press the vol ( G ) button. menu Safety instructions Monitor Overview DRP (Digital Reality Picture) up vol Basic operation down 1 Press the up/down button to select DRP and then press the vol ( G ) button.
Using the screen option < Use this option when viewing the video input > - This function work only in video mode. READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Use the up/down button to select SCREEN and then press the vol ( G ) button. SPECIAL LANGUAGE ARC SCREEN G TRANSPARENCY PIP/DW G G G TV VCR G up vol down 2 Use the D / E button to select TV or VCR. • Select the VCR option if watching a VCR.
Safety instructions Monitor Overview Adjusting sound READY menu Connections Press the menu button and then press the up/down button to select SOUND menu. Press the vol ( G ) button. up vol down SOUND DASP AVL TREBLE BASS BALANCE G G 50 50 50 0 G G Time setting Use the up/down button to select TREBLE and then press the vol ( G ) button. (if adjusting treble) Basic operation 1 G up vol down Picture & Sound • Adjust BASS and BALANCE in the same way.
Auto sound control DASP • This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects the appropriate sound option based on the program content. easy sound 1 Press the easy sound button. 2 Press the easy sound or vol button to select a sound setup. DASP F USER G • Each press of easy sound or vol button changes the screen display as shown below.
< This feature maintains an equal volume level; even if you change channels. > READY Connections Press the menu button and then press the up/down button to select SOUND menu. Press the vol ( G ) button. menu up Basic operation vol down 1 SOUND DASP AVL TREBLE BASS BALANCE G G 50 50 0 G ON OFF G Time setting Press the up/down button to select AVL and then press the vol ( G ) button. G up vol down Press the up/down button to select ON or OFF.
Using Still function - This feature isn’t available for RGBinput source. freeze 1 Press the freeze button. • You can still the current picture. • The sub picture is stilled in PIP or Twin picture mode. 2 To return to normal viewing, press the freeze button again. Tips • If still picture is on the screen for more than 5 minutes, the image becomes dark. If another function is activated, normal brightness of the screen is restored.
Safety instructions Monitor Overview Adjusting OSD Transparency READY menu Connections Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. up vol down Press the up/down button to select TRANSPARENCY and then press the vol ( G ) button. Basic operation 1 SPECIAL LANGUAGE ARC SCREEN TRANSPARENCY G PIP/DW G G G G 5 Time setting up vol down • The adjustment range of TRANSPARENCY is 0 ~ 5.
Setting picture format - You are available to 16:9 or 4:3 in RGB. - If 4:3 is on the screen for a long time, that fixed image may remain visible. - Don’t display 4:3 picture format or TWIN PICTURE on screen above 10 hours continuously. ratio Press the ratio button to select a desired picture format. • Each time you press ratio or vol button, you can select 16:9, 4:3 or ZOOM alternatively.
- Early malfunction can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new Monitor. Be sure to turn the power power off and unplug the power cord before you begin any cleaning. Connections Cleaning the screen Safety instructions Monitor Overview Maintenance Basic operation 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Troubleshooting check list • Check whether the Monitor is turned on. No picture & No sound Picture OK & No sound • Power cord inserted into wall outlet? • Plug another product’s power cord into the wall outlet where the Monitor’s power cord was plugged in. • Press the VOLUME (G) button. • Sound muted? Press MUTE. • Check to see if there is any object between the Plasma Display and the remote control causing obstruction.
Safety instructions Monitor Overview Product specifications 34.8 Depth (inches) 3.9 Weight (pounds) 154.3 Power consumption (watts) 320 Power requirement AC 120V ~ 60Hz Resolution 1280 x 720 (Dot) Color 16,770,000 (256 steps of each R, G and B) Temperature (In operation) 0 ~ 40°C Humidity (In operation) under 80% Special features Height (inches) Picture & Sound 57.
Model number : DPDP60W Serial number : PLASMA DISPLAY PANEL Please read this operating guide carefully before using the Monitor. Keep the operating guide with the Monitor. For future reference, write down the serial number on the back of the Monitor in the space provided below.
