Model number : DPDP60W Serial number : PLASMA DISPLAY PANEL Please read this owner’s manual carefully before operating the Monitor. Retain it for future reference. Record model number and serial number of the Monitor. See the label attached on the back of the Monitor and quote this information to your dealer when you require service.
FCC NOTICE • DPDP60W : A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to raido communications.
Table of Contents First step WARNINGS ..............................................................4 SAFETY INSTRUCTIONS........................................5 Composition Front Panel Controls ................................................8 Connection Panel Overview .....................................9 Remote Control Key Functions/Accessories ..........10 Installation of the monitor .......................................12 Connection VCR Setup.........................................................
WARNINGS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
First step SAFETY INSTRUCTIONS Composition Important safeguards for you and your new product 8. Transporting Product The safety and operating instructions should be retained for future reference. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 2. Follow Instructions 4. Heed Warnings Time setting 3.
SAFETY INSTRUCTIONS (Continued from previous page) The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power source indicated on the marking label.
First step 19. Servicing 20. Damage Requiring Service The product should be mounted to a wall or ceiling only as recommended by the manufacturer. The product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. 24. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Time setting Picture & Sound Special function a.
Front Panel Controls ON/OFF ON/OFF INPUT SELECT VOLUME Main power button Power standby indicator Illuminates red in standby Illuminates green when the Monitor is switched on INPUT SELECT VOLUME INPUT SELECT button Sub power button VOLUME (F,G) buttons Remote control sensor 8
First step Connection Panel Overview Composition Connection Basic function R AUDIO L (MONO) VIDEO AV INPUT Y PB PR PR COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) (+) R ( ) R AUDIO L RGB-PC INPUT (VGA/SVGA/XGA/SXGA) RGB-DTV INPUT (480p/720p/1080i) AUDIO INPUT S-VIDEO ( ) L (+) EXTERNAL SPEAKER (8Ω) AC INPUT (+) R ( ) R AUDIO L RGB-PC INPUT (VGA/SVGA/XGA/SXGA) RGB-DTV INPUT (480p/720p/1080i) S-VIDEO ( ) L (+) EXTERNAL SPEAKER 8Ω AC INPUT Special function AV INPUT /
Remote Control Key Functions/Accessories - When using the remote control aim it at the remote control sensor on the Monitor. power on button sleep button (Refer to p.34) power on system off sleep mute mute button switches the sound on or off. 2 1 number buttons 3 5 4 6 8 7 9 video/pc menu 0 video/pc button up vol enter vol down pip button (Refer to p.25) pip twin picture input select position input select button (Refer to p.26, 29) ratio button(Refer to p.
First step Composition Connection INPUT SELECT button on the remote control system off button Each press of this button changes the mode as below. No function VIDEO COMPONENT Basic function RGB menu button Time setting enter button up/down buttons vol buttons Picture & Sound twin picture button(Refer to p.28) When pressing this button, it’s displayed DW on screen. position button (Refer to p.26) Special function freeze button (Refer to p.42) easy sound button(Refer to p.
Installation of the Monitor - Use this product at the place lower than the altitude of 6562 feet (2000m) to get the best quality of picture and sound. ,,,,,, ,,,,,, ,,,,,, ,,,,,, - Your DPDP60W (Monitor) can be installed on a wall as shown below, or on a desktop pedestal as shown on the next page. Wall Mount Installation • The monitor can be installed on the wall as shown above.
First step Composition Desktop Pedestal Installation Connection Basic function Time setting INPUT SELECT ON/OFF VOLUME Picture & Sound • The Monitor can be installed on the desk as shown above. (For further information, refer to the optional ‘Desktop stand Installation and Setup Guide’.) Special function b. (In case of desktop type) 3.94inch Others 3.94inch 1.18inch 3.94inch 2.
VCR Setup - As shown below, when connecting the Monitor to a VCR, match the colors of AV input jacks on the Monitor with the output jacks on the VCR: Video = yellow, Audio (Left) = white, Audio (Right) = red. - If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor. - When connecting a S-VIDEO VCR to the S-VIDEO socket, the picture quality will be further improved.
First step Cable TV Setup - After subscribing to a cable TV service from a local provider and installing a converter you can watch cable TV programming.
External AV Source Setup - As shown below, when connecting the Monitor to an external source, match the colors of AV input jacks on the Monitor with the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.
First step DVD Setup Composition How to connect a DVD (digital video disk player) • Connect DVD video inputs to Y, PB, PR of COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) and audio inputs to Audio sockets of AV INPUT.
DTV Setup - To watch digitally broadcast programs, purchase/connect a digital SET-TOP BOX. - If the DTV signal is input to the Monitor, you can adjust the picture size. - You can select only the 16:9 picture format in DTV 720p/1080i mode.
First step PC Setup - See your computer’s image on the Monitor.
Monitor Image Display Specifications Resolution 640x350 720x400 640x480 800x600 832x624 1024x768 1152x864 1152x870 1280x960 1280x1024 20 Horizontal Vertical Frequency (KHz) Frequency (Hz) 31.468 37.861 31.469 37.927 31.469 35.000 37.861 37.500 43.269 45.913 53.011 64.062 35.156 37.879 48.077 46.875 53.674 56.000 64.016 49.725 48.363 56.476 60.023 68.677 54.348 63.995 67.500 77.487 68.681 60.000 75.000 63.981 79.976 70.09 85.08 70.08 85.03 59.94 66.66 72.80 75.00 85.00 90.03 100.04 120.00 56.25 60.
First step PC Computer Mode Feature Check - Select RGB first, see page 11. 2 Press the up/down button to select menus. Connection 1 Press the menu button to show menus on screen. Composition menu • Each press will cycle through the different menus as shown below.
PC Computer Mode Adjustments Auto adjustment - The position and trembling of picture is automatically adjusted. READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Press the up/down button to select SCREEN and then press the vol ( G ) button. up SPECIAL LANGUAGE ARC SCREEN SCREEN TRANSPARENCY PIP/DW G G G G TO SET G G vol down 2 Press the up/down button to select AUTO.CONFIG. and then press the vol ( G ) button.
Composition Adjusting horizontal / vertical postion READY Connection Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu First step PC Computer Mode Adjustments up vol down Basic function 1 Press the up/down button to select SCREEN and then press the vol ( G ) button.
Picture Phase Adjustments • If the picture isn’t clear after auto adjustment and especially if the characters are still trembling, then adjust the picture phase manually. READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Use the up/down button to select SCREEN and then press the vol ( G ) button.
First step PIP function Connection Watching the PIP (Picture in Picture) pip Press the pip button. vol button, you can change the PIP (S) PIP (L) Basic function • Each time you press pip or PIP size as below. Composition - Make sure to select RGB before operating. - This function works only in the following resolution; 640x480, 800x600, 1024x768(only in Vertical frequency 60 Hz) - When you select RGB or DTV for main picture in PIP/Twin picture, you can watch video, cable TV or DVD for sub picture.
Selecting the input signal input select Press the input select button in PIP mode. • Each time you press input eslect button, you can select VIDEO or COMPOENT alternatively. VIDEO COMPONENT In case of COMPOENT, this function works only in 480i mode. PIP INPUT F VIDEO G Moving the Sub picture position Press the position button in PIP mode. • Each press of the position button change the position of the sub picture as below.
First step PIP function Composition Selecting the sound items - This function works only in the following resolution; 640x480, 800x600, 1024x768(only in Vertical frequency 60 Hz) - To use this function, connect PC/DTV video input to RGB-PC INPUT(VGA/SVGA/XGA/SXGA) RGB-DTV INPUT(480p,/720p/1080i) socket and connect PC/DTV audio inputs to AUDIO INPUT. Connection READY menu Basic function Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button.
Twin picture function - Make sure to select RGB before operating. - This function works only in the following resolution; 640x480 (only in Vertical frequency 60 Hz) twin picture Press the twin picture button. • Each time you press select ON or OFF. twin picture or vol button, you can Main picture Sub picture DW F ON G • To avoid showing a fixed image on the screen, sub picture moves every 2 hours.
First step Composition Selecting the input signal Connection input select Press the input select button in TWIN PICTURE mode. • Each time you press input eslect button, you can select VIDEO or COMPOENT alternatively. VIDEO COMPONENT Basic function In case of COMPOENT, this function works only in 480i mode.
Using the remote control Installing batteries • Open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity, match “+” with “+”, and match “-” with “-”. • Install two 1.5V “AA” alkaline batteries. Don’t mix the used batteries with new batteries. Notes for using the remote control Make sure these are no objects between the remote control and its sensor. 30 Don’t place the remote control near a heater or damp place.
First step Turning on the Monitor Composition - When using the remote control, aim it at its sensor on the Monitor. Turning on the Monitor just after installation Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the or INPUT SELECT button on the Monitor or press the power on or video/pc button on the remote control and then the Monitor will be switched on. Basic function 2 Connection 1 Connect power cord correctly.
Selecting language for the menus READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Press the up/down button to select LANGUAGE and then press the vol ( G ) button. SPECIAL LANGUAGE ARC SCREEN TRANSPARENCY PIP/DW G ˙–„ G ENGLISH ESPAÑOL PORTUGUÊS FRANÇAIS G G G up vol down 2 Press the up/down button to select the desired language. up down 3 Press the enter button.
First step Checking features Composition menu Press the menu button. 2 Press the up/down button. Connection up 1 • Each press will cycle through the menus shown below.
Setting sleep time Press the sleep button to set sleep time. Each time you press the next preset setting time is changed as shown below. sleep F --- G F 10 G F 20 G F 30 G F 120 G F 90 G F 60 G F 240 G F 180 G SLEEP F 30 G • To release sleep time setting, press the sleep or vol button repeatedly to select F --- G. Tips • When the sleep time you want is displayed on the screen, don’t press the sleep button.
First step Auto picture control < APC sets the Monitor with the best picture appearance > Composition - This function isn’t select in RGB, PIP/TWIN PICTURE. APC (Auto Picture Control) Connection apc Press the apc button. 2 Press the apc or vol button to select your desired picture condition. Basic function 1 Time setting F CLEAR G Picture & Sound APC • Each press of vol button changes the screen display as below.
Adjusting picture appearance - You can’t adjust contrast, brightness, color, tint, sharpness in sub picture for PIP / Twin picture. READY Press the menu button and then press the up/down button to select PICTURE menu. Press the vol ( G ) button. menu up vol down 1 Press the up/down button to select CONTRAST and then press the vol ( G ) button.
< This function stresses picture outline in showing a dark area light > Composition READY Connection Press the menu button and then press the up/down button to select PICTURE menu. Press the vol ( G ) button. menu First step DRP (Digital Reality Picture) up vol down PICTURE APC DRP G G 100 50 50 0 50 G CLEAR SOFT G G G Time setting CONTRAST BRIGHTNESS COLOR TINT SHARPNESS up Basic function 1 Press the up/down button to select DRP and then press the vol ( G ) button.
Selecting the screen item - This function work only in video mode. READY Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. menu up vol down 1 Press the up/down button to select SCREEN and then press the vol ( G ) button. SPECIAL LANGUAGE ARC SCREEN G TRANSPARENCY PIP/DW G G G TV VCR G up vol down 2 Press the D / VCR. E button to select TV or • Select the VCR to stable condition of picture when you are watching VCR.
First step Adjusting sound appearance Composition READY menu Connection Press the menu button and then press the up/down button to select SOUND menu. Press the vol ( G ) button. up vol down SOUND DASP AVL TREBLE BASS BALANCE G G 50 50 50 0 G G Time setting Press the up/down button to select TREBLE and then press the vol ( G ) button. (in case of adjusting treble) Basic function 1 G up vol down Picture & Sound • Adjust BASS and BALANCE in the same way.
Auto sound control DASP • This function lets you enjoy the best sound without any special adjustment because the Monitor automatically adjusts the sound appropriate to viewing program character by self-intelligence. easy sound 1 Press the easy sound button. 2 Press the easy sound or vol button to select your desired sound. DASP F USER G • Each press of easy sound or vol button changes the screen display as below.
< This function keeps on an equal volume level even if you change channels> Composition - This function works only in case of connecting a cable box with the monitor. READY Connection Press the menu button and then press the up/down button to select SOUND menu. Press the vol ( G ) button.
Using Still function - This function doesn’t work in RGB. freeze 1 Press the freeze button. • You can still the current picture. • The sub picture is stilled in PIP or Twin picture mode. 2 To finish this function, press the freeze button again. Tips • If still picture is on the screen for more than 5 minutes, the screen gets dark. Any function is activated, the brightness of the screen gets restored. • This function don’t worked in RGB mode.
First step Adjusting OSD Transparency Composition READY menu Connection Press the menu button and then press the up/down button to select SPECIAL menu. Press the vol ( G ) button. up vol down Press the up/down button to select TRANSPARENCY and then press the vol ( G ) button. Basic function 1 SPECIAL LANGUAGE ARC SCREEN TRANSPARENCY G PIP/DW G G G G 5 Time setting up vol down • The adjustment range of TRANSPARENCY is 0 ~ 5.
Setting picture format - You are available to 16:9 or 4:3 in RGB and 16:9 is only available in DTV 720p/1080i. - If 4:3 is on the screen for a long time, that fixed image may remain visible. ratio Press the ratio button to select a desired picture format. • Each time you press ratio or vol button, you can select 16:9, 4:3 or ZOOM alternatively. ARC F 16 : 9 G <16:9> ARC F 4:3 G <4:3> ARC F ZOOM G • You can also select 16:9, 4:3 or ZOOM in the ARC of the SPECIAL menu.
First step Maintenance Composition - Early malfunction can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new Monitor. Be sure to turn the power off and pull out the plug before you begin any cleaning. Cleaning the screen Connection Basic function 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Troubleshooting check list • Check whether the Monitor is turned on. No picture & No sound Picture OK & No sound • Check the power cord. • Plug another product’s power cord into the wall outlet where the Monitor’s power cord was plugged in. • Press the VOLUME (G) button. • Check to see if there is any object between the Plasma Display and the remote control causing obstruction. The remote control doesn’t work • Check to see if the batteries are installed with the correct polarities. (Refer to p.
First step Product specifications Composition Height (inches) 34.8 Depth (inches) 3.9 Weight (pounds) 154.3 Power consumption (watts) 320 Power requirement AC 120V ~ 60Hz Resolution 1280 x 720 (Dot) Color 16,770,000 (256 steps of each R, G and B) Picture & Sound 57.3 Time setting Width (inches) Basic function DPDP60W Connection MODEL Special function • This product specifications above can be changed without notice for quality improvement.
Model number : DPDP60W Serial number : PLASMA DISPLAY PANEL Please read this owner’s manual carefully before operating the Monitor. Retain it for future reference. Record model number and serial number of the Monitor. See the label attached on the back of the Monitor and quote this information to your dealer when you require service.
