Manual

Control the volume on your home audio system without changing modes
Find the code that operates your amplifier. Test it to
make sure it's the correct one by following the procedure
in "Programming Your Remote"on the previous page.
Programyour audio system into one of the available AUX
modes: Aux, Aux+l, Aux+2, or Aux+3.
Press and hold PRGon your remote until the indicator
light stays lit, then release.
Press 4-9-9; then ENTERon the remote. The indicator
light will flash three times the code was accepted.
Audio system volume/mute now appears in all modes.
Note: Youcan also program Cable BoxVolume and Mute
control (if available) into your cable box mode (CABLEor
AUX mode) by repeating the steps for programming on
the previous page but entering 3-9-9, instead of a brand
code, then pressing ENTER.
Toput everything back to normal, reprogramthe mode from Step
3 with the original brand code.
If you can't find the code for your amplifier, use the Auto Find
feature on page 41.
©
AMPLIFIER
Audio devicewhich sends sound to speakers,like an Audio Tuner,Receiver,or Amplifier.
See Audio Tuners/Amp list on page43.
CABLE BOX VOLUME/MUTE Some cable boxes have volume controls.
206-3591 PA GE 3 9