Manual

PAGE 26 IOPERATION
Recording one show while watching another.
Note=
If you have a cable box connected to your VCR, you cannot
record one show and watch anothe_
Choose the show you wish to record using the VCR's channel
selector, Choose the show you wish to watch using the TV's
channel selector.
Turn TV and VCRon.
M
B
Place VCRin VCR mode by pressing the TV/VCR
button on the remote repeatedly until the VCR
indicator light appears in the VCR front paneL.
Select channel 3 or 4 at the TV.If you have
connected your VCRto the TV'sA/V input jacks,
select the A/V source at the TV for a better
picture.
Select the channel to be watched and recorded
at the VCR.If you have a cable box, select the
cable box output channel (usually 3 or 4) at the
VCR.Select cable box channels at the cable box.
Insert a VHScassette tape into the VCR.
Press SP/EP to select recording speed, if desired.
Recording speed is always SP, unless you select
EP.
power
sp/ep tv/vcr
Remote's Controls
power mstop/eject ±
sp/ep orec/itr
© ©
VCR'sControls
Options You Can Use While Recording
Instant Recording
(until end of tape)
PAUSE-
Momentarily pauses recording. PressPAUSEagain to
resume recording.
STOPor STOP/E,1ECT-
Stops and exits recording mode.
i
PressREC/ITRuntil recordingbegins. REC
indicator Light appearsin the VCRfront panel.
Recording continues until you reach the end of
the tape, or until you press STOPto stop
recording.
PLaceVCRin TV mode by pressing the TV/VCR
button on remote to turn off VCRindicator Light
in the VCRfront paneL.
F
SeLectthe show you wish to watch using the
TV'schannel selector.
Note:
To return to the show you're recording, select channel 3 or 4
at the TV. Place the VCR in the MCRmode by pressing the
TV/VCR button on the remote to show the VCR indicator
light in the VCR's Front panel