Manual

OPERATION I PAGE 21
This page describes how to connect a camcorder to your VCR.
Back Panel of Stereo VCR
VH F/UttF/CAW
!,
t _t
V
A/V cableis not providedwithVCR.
W
Turn off power or unplug VCR
before making any connections.
Select AUX for Viewing an Audio/Video sourceUke a
Camcorder
1. With TVand VCRon, pLaceVCRin VCRmode by pressing the
TV/VCRbutton on the remote (and repeat) until the VCR
indicator Light appears in the VCR'sfront paneL.
2. SeLectchanneL3 (or 4) on the TV. Note: If your TV hasA/V
jacks, you may get a better picture if you connect your VCR
there. (Then, select the A/V source on the TV.)
3. At the VCR,Channel down lower than the LowestchanneL (or
Channel up above the highest) to seLect"AUX". You can aLso
choose the SETUPmenu as described in "How to Access
Menus" on page 9.
Press3 for the SETUPmenu's SOURCEitem.
Press3 for AUX, then ENTER.(PressQUITto exit.)
SETUPMENU
SOURCE:TUNER(W)
H, x[]O,TV
Press number keys
_, then ENTER QUIT = exit
Press3 to select AUX
Items in the Menu
SOURCE Showsthe program source--W, CATV,or AUX--selected for the VCRto receive.
TUNER TheVCRis usingits Tuner to receive programs from an antenna or cable.
TV SeLectsprograms for the MCRfrom a rooftop-type antenna.
CATV SeLectsprogramsfor the VCRfrom CableTV.
AUX SeLectsprograms for the VCRfrom the R-AUDIO-L--VIDEOIN jacks (where you may have connected your
camcorder).