Manual

PAGE 20 I OPERATION
This page shows a typicaL video system and explains how to select channels.
AU-Channe[ T
Antenna
Cahte IV
Wail 3ack
Direct CabLe _Tr__
Typlca{
Cable Box
From _NO
CabLe- N UT
System ' _CH3 CH4 (CabLeBox
Output
toVCR
Stereo VCR
CHANNEL
3_4
AUDIO VIDEC
VHF/UHF/CATV OUT OUT
TV
VCROutput to TV
(Channel 3 or 4 when
VCRis on and TV/VCR
is in VCRposition)
Audio/Video Output to I!/
VHF-UHF
CABLE IN
VIDEO AUDIO
IN IN
Selecting Channels when the VCR is OFF
I. TurnTV on.
2. SeLect channel you'd like to watch at the]h/. If you have
a cable box, select channel 3 or 4 at the TV. SeLect cable
box channeLs at the cable box.
Selecting Channels at the TVwhen VCRis ON
1. TurnTVandVCRon.
2. PLaceVCRin TV mode by pressing the TV/VCRbutton on
the remote controL repeatedly until the VCRindicator
disappears from the front panel of the VCR.
3. Select channel you'd Uke to watch at the 13/.If you have
a cabLebox, select channel 3 or 4 at the TV.Select cable
box channels at the cabLebox.
Selecting Channels at the VCR when VCR is ON
1. TurnTV and VCRon.
2. Place VCRin VCRmode by pressing the TV/VCRbutton on
the remote control repeatedly until the VCRindicator
appears in the front panel of the VCR.
3. Select channels3 or 4 at the TV.If your TV is equipped
with A/V input jacks, checkyour TV operating manual to
select the A/V source for a better picture.
4. Selectthechannelyou'dliketo watchattheVCR.Ifyou
havea cablebox,selectchannel3 or4 attheVCR.
Selectcablebox channelsatthecablebox.