Manual

INSTALLATION J PAGE 11
Somethings you must do and others you may want to do before you can operate your VCR.
Set Date and Time for Clock
(Required) Set the cLockin the VCRto the
currentdate and time. SeeCLOCKMenu on page
16 for details.
You must set the clock before you can use
any Timer-controlled VCR/eatures, e.g.
TIMER recordings,
Press3.
I
CLOCK MENU
AUTO DAYLIGHT SAVING:ON
nON BOFF
MANUAL CLOCK SET:_
Pressnumberkeys
% QUIT=exit ,
CLOCK MENU
CLOCK MENU
MONTH : g JANUARY
DAY : 1 FRI
YEAR : 1999
TIME : 12:00 AM
Press number keys
then ENTER QUIT = exit
PressNUMBER(0-9) then
ENTERto set date and time
m
Select Source for YCR
(Optional) Set the source of the VCRfor the
type of program signal you have connectedto
the ANTENjack on the back of the VCR,Choose
TVif you have an antenna connected to the VCR.
ChooseCATVif you have a cable system (with or
without a cable box) connected to the VCR.
ChooseAUX if you have an accessory
Audio/video (A/V) connected to the VCR.See
SOURCEoption on SETUPmenu (page 18) for
details.
Press3.
I
SETUP MENU
AUTO PROGRAM:
CH. ADDIDEL:
SOURCE:
ON-SCREEN DISPLAY:
LANGUAGESELECT:
Press number keys
QUIT = exit
SETUPMENU
SETUP MENU
r
SOURCE:TUNER('W)
Press number keys
then ENTER QUIT = ex{t
PressNUMBER (1, 2, or 3)
to select the desired
source
Use Auto Program to Find Channels
(Required) Use AUTOPROGRAMto find active
channeLsin your broadcast area. AUTOPROGRAM
stores the active channeLsthat you can access
by using the CH (V/A). SeeAUTOPROGRAMon
the SETUPMenu (page 18) lOTdetails.
Press1.
I
SETUP MENU
AUTO PROGRAM:
CH. ADD_EL:
SOURCE:
ON-SCREEN DISPLAY:
LANGUAGESELECT:
Press number keya
QUIT = exit
SETUPMENU
SETUP MENU
AUTO PROGRAM:SEARCHING
• QUIT = exit ,
D Use CH. ADD/DEL to Create Favorite
Channels
(Optional) Use CH.ADD/DELto changethe List
of active channels found whenusingAUTO
PROGRAM,so you can List your favorites. See
CH.ADD/DELon the SETUPMenu (page 18) for
details.
Press2.
I
SETUP MENU
AUTO PROGRAM:
CH, ADC/DEL:
SOURCE:
ON-SCREEN DISPLAY:
LANGUAGE SELECT:
SETUP MENU
CH. ADD/DEL: CH. [] ADD
Press number keys
then ENTER QUIT = exit
PressNUMBER(o-g)
then ENTER
Press number keys
QUiT = exit
SETUPMENU