Manual

PAGE 10 I INSTALLATION
Thingsyou mustdo beforeyou can operateyourVCR.
Connect the Power
(Required) PLugyour VCRinto an unswitched
120 Vac,60 Hz householdpoweroutlet. Turn on
the VERby pressing the POWERon the remote
or on the VCR'sfront pane[. While plugged into
an AE out[et, the VCRconsumes 3W of electrica[
power in OFFcondition.
Do not plug the VCRinto o switched power
outtet. Otherwise, when the power is
switched off,, the VCRturns off.. You may
then have to reset the time and date, end
reprogrem operational features.
WALL
SWITCH
POWER_
OUTLET
TYPICALALLegr_CR
Set Position of the CH3/CH4 Switch
(Required) The CH3/CH4switch on the VCR's
back panel determines which channelthe VCR
usesto send video signalsto your TV.The TV
must be tuned to the same channelyou set with
the CH3/CH4switch to see tape p[ayback and
status displays from the VCR.To determine
which video channel providesthe best picture
for your system,try the switch in EH3 position
and tune your TV to channel3; then try the CH4
position and tune your TVto channel4.
Fora testdisplay,presstheTV/VCRbuttonon
remoterepeatedlyuntiltheVCR indicator(a
smaLLgreenLight)appearsintheVCR'sfront
pane[display.PressMENU on theremotetosee
the mainmenu.
Select Language for VCR Menus/Displays
(Optional) SeLect EngLish, Spanish, or French
for VCR menus and status displays. See the
LANGUAGESELECToption on the SETUP menu for
details.
Press5.
I
SETUP MENU
AUTO PROGRAM:
CH. ADD/DEL:
SOURCE:
ON-SCREEN DISPLAY:
LANGUAGESELECT:
Press number keys
QUIT = exit
SETUPMENU
SETUPMENU
i
LANGUAGE SELECT :ENGLISH
ENGLISH I_ ESPANOL
FRANqAIS
Press number keys
• then ENTER QUIT = exit •
PressNUMBER(1, 2, or 3)
to select the desired
language