User Guide

Removing Exposed Film - Step by step instructions
Replace the lens cap to prevent accidental exposure of film
during rewinding.
Press Shutter Release Button [3].
With the finger tip depress the Film Rewind Sleeve
(arrowed above) into the cut-out portion of the surrounding
sleeve. It will click and stay down.
Lift out Rewind Crank [16] and rotate clockwise in the
direction of the arrow. You will feel the film being rewound
into the cassette - stop when resistance ceases.4
Lift Rewind Knob [16] fully to open camera back. Remove
exposed cassette.
Advance Film Transport Lever [2] in short strokes until it
stops. The Film Rewind Sleeve will return to its original
position.
Fire shutter.
The camera is now ready for your next film.