INSTRUCTION MANUAL

Zenith Firearms | Come Shoot the Quality
21
• Rotatethebarrelbushingbackcounterclockwise90°andthen45°
furtheruntilitcanberemoved.
• Removetheslidestopbyslowlypushingthesliderearwarduntil
thehalfmoondetentnotchlinesupwiththerearofthestopand
thenpressthestopfromtherightsideandpulloutfromtheleft.
• Removetheslidebyslowlypushing/pullingitforwardoffofthe
frame.
• Removetherecoilspringguiderod,andrecoilspringifitisstill
installed.
• Lifttounlockandthenremovethebarrelfromtheslide.
Assembly for Model 1911 A1
• Followthestepsfordisassemblyinreverseorder.
ATTENTION: Take care to maintain fi rm control of the recoil spring plug
during assembly. Failure to do so may result in injury as the recoil spring
plug is propelled by force of the recoil spring. Also, ensure correct
positioning of the barrel link during reassembly.