INSTRUCTION MANUAL

Zenith Firearms | Come Shoot the Quality
19
CLEANING THE PISTOL
Cleaningandoilingthebarrel:
• Sprayalittlegunoilonthebrush.
• Insertthebrushintothebarrelfrom
breachorchamberedend
(Picture22).
• Brushtheinsideofthebarrelby
pushingforwardandbackwards.
• Wipetheinsideofthebarrelwitha
cleananddrypatchuntilthepatch
comesoutclean(Picture23).
• Cleanthebarrellockingblockwith
thebrushsprayedwithprotective
oil.Ifnecessary,youcanapplyoil
lightlytotheoutsideofthebarrelbypassingacleancotton
patchsoakedinprotectiveoilthroughit(Picture24).
Cleaningtheslideandoiling:
• Cleantheslidewiththeoiledbrush(Picture25).
• Lightlyoiltheslide.
• Agoodmethodistoallowadropofoiltoowdownthe
sliderailsbygravity(Picture26).
Picture 22
Picture 23
Picture 24
Picture 25
Picture26