INSTRUCTION MANUAL

Zenith Firearms | www.zenith rearms.com
20
WARNING
Donotoiltheringpinholewhilecleaning.
Cleanandoiltherecoilspringandrecoilrod:
• Lightlyoiltherecoilspringandrecoilrod(Picture26).
Cleanandoiltheframe:
• Cleanallsurfacescarefully(Picture27).
• Putalightcoatofoilontherailsandtriggerbar–sear
connection(Picture28).
Cleanandoilthemagazine:
• Makesurethemagazineisempty.
• Pullthemagazinebutt-platedownandremoveitutilizing
thetoolprovidedtounlocktheoorplate.
• Removedebrisinsidethemagazinewiththebrush.
• Cleantheinsideandoutsideofthemagazine.
• Assemblethemagazinebyapplyingthereversemethodof
disassembly.
ASSEMBLY OF THE PISTOL
• Putthebarrelinsidetheslide.
• Puttherecoilspringintheslidegroupandmakesuretherecoilrodisttedtothe
barrelnotchcorrectly.
• Puttheslidegroupintherailsontheframeasshown.
• Pushtheslidebacktotheendandthetakedownleverwillrotatecounter
clockwise,lockingitself.
Picture26
Picture27
Picture 28