INSTRUCTION MANUAL

Zenith Firearms | Come Shoot the Quality
19
CLEANING THE PISTOL
Cleaningandoilingthebarrel:
• Sprayalittlegunoilonthebrush.
• Insertthebrushintothebarrelfrom
breachorchamberedend
(Picture19).
• Brushtheinsideofthebarrelby
pushingforwardandbackwards.
• Wipetheinsideofthebarrelwitha
cleananddrypatchuntilthepatch
comesoutclean(Picture20).
• Cleanthebarrellockingblockwith
thebrushsprayedwithprotectiveoil
(Pictures21and22).Ifnecessary,
you can apply oil lightly to the
outsideofthebarrelbypassing
acleancottonpatchsoakedin
protectiveoilthroughit(Picture23).
Cleaningtheslideandoiling:
• Cleantheslidewiththeoiledbrush
(Picture24).
• Lightlyoiltheslide.
• Agoodmethodistoallowadropofoiltoowdownthe
sliderailsbygravity(Picture25).
Note: Other rearms cleaners can be used in place of oil.
Picture19
Picture20
Picture21
Picture 22
Picture 23
Picture 24
Picture 25