INSTRUCTION MANUAL

Zenith Firearms | www.zenithrearms.com
18
DISASSEMBLY OF THE PISTOL
Makesurethatthepistolisunloadedbeforedisassemblyofthepistol.
• Takethemagazineoutbypressingthemagazinereleasebutton.
• Pressthedisassemblylatchreleasebuttonwhichprotrudes
fromtherightsideofthepistolwiththeindexnger
(Picture14).
• Whileyouarepressingthebutton,rotatethedisassembly
latchontheleftsideoftheframewiththethumb90°
clockwise(Picture15).Movetheslideforwardwiththe
barrel,lockingblock,recoilspring
andrecoilspringguiderod(Picture
16).
• Whileslightlypressingtherecoil
springandspringguide,move
forward,liftandtakeouttherecoil
springandguidefromtheslide
(Picture17).Becareful,therecoil
springandguideareundertension.
Pressbarrellockingblockplunger
andtakeoutthebarrelwithlocking
blockfromtheslide(Picture18).
Picture14
Picture18
Picture15
Picture16
Picture17