Instruction manual
43
TV TUNER OPERATION
TV REMOTE CONTROL FUNCTIONS
TV Station Selection
■ Press the [Source] button until the TV
function is selected.
Selecting Preset station
■ Use the [ENTER/5 or /6] button to
select the previous or next TV channel
stored in the memory.
Auto Scan
■ Press and hold the [BAND/RPT] button
to enable the unit to scan through the
entire frequency spectrum and store
available frequencies in the memory.
Manual Scan & Fine Tuning
■ Press the [9 or :] button to fine tune
the current channel to the desired
direction, while holding the key will
automatically scan up or down to the
previous or next available channel.
Volume Adjustment
1. Press the Volume Control +/- buttons to
increase or decrease the volume.
2. Press the Mute button to disable sound.
Scan (Auto)
■ Push and hold the [Menu/Band] button
to enable the unit to scan through the
entire frequency spectrum and store
available frequencies in the memory.
Manual Scan & Fine Tune
■ Press the [9 or :] button to fine tune
the current channel at the desired
direction, and hold will automatically
scan to the previous or next available
channel at the desired direction.
Selecting Station
■ Use the [ENTER/5 or /6] keys to
navigate to the previous/next available
preset channels.
Number Keys
■ The 0-9 Keys and the ENTER button
can be used to select the Preset
Station stored in memory.
■ Press and hold one of them to store the
current frequency into memory.
■ Press the ENTER button to affirm, and
press the10+ button to clear.
Audio
■ Push the [AUDIO/ST] to select either
mono or stereo output.
BASIC CONTROLS
■ Press the [Source] button until the CDC
function is selected.
■ Press the [Mute] button to shut down
the audio output.
■ Press the [4/ II] button to play or pause
disc playback.
■ Press the [Previous Chapter 9 or
Next Chapter :] button to select the
previous chapter or next chapter on the
disc.
■ Press and hold the [Previous Chapter
9 or Next Chapter :] button to fast
forward or fast reverse playback (at 2-
4-8 time speed).
EXTERNAL DVD/CD
CHANGER OPERATION
ZEM-W700DMM Manual E.indd 43 14.01.2005 13:32:25 Uhr