Instruction manual

36
5. PLAY/PAUSE/5
■ DVD changer mode
Press to pause and resume playback;
and hold it to select the next disc.
■ Radio mode
a. when storing function is not active,
press it to select the next frequency;
and hold it to start storing function.
b. when storing function is active, press it
to select the next location; and hold it
to store the next frequency in the next
location.
6. PREVIOUS
■ Identical with the function on the remote
control.
7. NEXT
■ Identical with the function on the remote
remote control.
8. BAND/REPEAT
■ RADIO/TV mode
Identical with the function on the remote
control.
■ DVD changer mode
Press this button to repeat the current
chapter/track disc.
Press and hold it to repeat all disc.
*Refer to SANO DVD/CD changer
specification.
9. PTY/SCAN
■ CDC mode
Press it to scan the current disc.
Press it and hold it to scan the first
track/chapter of all discs.
■ FM state of the RADIO mode
Press it to startup the PTY function.
Press and hold it to activate the PTY-
SELECT function.
10. RANDOM/AF
■ CDC mode
Press this button to random play
the current disc. Press and hold it to
random play all discs.
■ FM state of the Radio mode
Press it to startup the AF function. Push
and hold it to switch the AF-REG on/off.
11. TA
■ TA switch.
*It will automatically search all stations
which are playing TrafficAnnouncement
programs when TA is activated.
12. SOURCE
■ Identical with the function on the remote
control.
13. H.ANGLE
■ After the TFT-LCD comes out, you can
move it in the horizontal position by
pressing this button (each step moves the
panel approx. 6mm forward or backward).
14. P.POWER
■ Pressing this key will turn the LCD power
on or off.
15. 5/6 (Angle +/-)
■ After the TFT-LCD panel comes out, you
can adjust the viewing angle by pressing
these buttons (each step changes the
angle for about 10°).
16. P.MODE
■ Pressing this key will allow you to select
the display mode, to either FULL or
NORMAL.
17. P.MENU
■ Identical with the function on the remote
control.
18. UP/DOWN
■ To move the cursor up or down in the on-
screen adjustment menu.
19. LEFT (-)
■ To move the cursor to the left side while
you are in the on-screen adjustment menu
■ To reduce a given value in this menu
or to reduce the audio system value.
■ When no adjustment menu is active,
pressing this key will dim the LCD
panel brightness.
20. RIGHT (+)
■ To move the cursor to the right side while
you are in the on-screen adjustment menu.
■ To increase a given value in this menu
or to increase the audio system value.
■ When no adjustment menu is active,
pressing this key will increase the LCD
panel brightness.
ZEM-W700DMM Manual E.indd 36 14.01.2005 13:32:22 Uhr