Instruction manual

34
USING THE REMOTE CONTROL
Aim the IR remote control directly at the
unit, or video source with an IR input.
Tips:
■ Maximum IR distance is 3 meters from
the sensor.
■ Direct sunlight or very bright light
reduces sensitivity to the IR remote
signal commands. Make sure the
monitor is not located in direct sunlight.
■ Obstruction between the remote sensor
and remote control may disrupt IR
signal reception.
BATTERY
If the remote control does not function
or the operating range is shortened,
please change to a new battery.
1. Pull out the battery holder.
Follow the arrow 1 - slide it to the right
towards the battery while at the same
time, pull the battery holder away from
the remote control.
2. Insert a new battery with the (+) side
up. (Type of battery: Crd2025)
3. Push to close the holder.
You will hear a small click as the tray
locks.
Batteries contain chemical substances, so
they should be disposed properly.
Tips:
■ Remove batteries if they are empty or if
the remote control will not be used for a
long time.
■ Battery and small parts can be a
choking hazard. Keep the remote
control away from young children.
ZEM-W700DMM Manual E.indd 34 14.01.2005 13:32:19 Uhr