Instruction manual

19
English
IR-REMOTE CONTROL
REMOTE CONTROL FUNCTIONS
1. POWER
■ Press the POWER-button to turn on/off the monitor.
2. DISP
■ Press the DISP-button to display the OSD.
3. INPUT
■ Press the INPUT-button to choose between the video-
inputs AV1 and AV2.
4. MENU
■ Press the MENU-button to enter the main menu.
■ When you entered the main menu, press the MENU-
button to confirm your selection.
5. EXIT
■ Press the EXIT-button to leave the menu.
6. [5] / [6]
■ Press one of the [5] / [6] buttons to select the submenu
you would like to adjust.
7. [3] / [4]
■ Press one of the [3] / [4] buttons to adjust the selected
feature.
USING THE REMOTE CONTROL
■ Aim the remote control directly at the unit.
■ Maximum IR distance is 3 meters from the IR-sensor.
■ Direct sunlight or very bright light reduces sensitivility to the IR remote signal
commands.
■ Obstructions between the IR-sensor and the remote control may disrupt the IR-signal.
0
MENU
EXIT
DISP AUTO INPUT
-/--
➀
➂
➄
➆
➁
➃
➅
ZEM-W1501RM Manual D+E.indd 19 09.01.2006 12:32:27 Uhr