User manual

44 45
ZE
-
N C 4 612
EXTERNAL PLAYBACK AND SOURCES
M-Zone
NOTE:
■ With deactivated M-Zone you will not see any signal on connected
M-Zone monitors (blackscreen).
■ The M-Zone volume cannot be adjusted on the device. Use the control
elements of the connected peripherals (i.e. roof monitor) instead, to adjust
the volume.
■ If the M-Zone and the front zone get both fed by one and the same
media source, the M-Zone stereo output will be muted.
■ The headunit does not memorize that the M-Zone has been activated
after shutting off. Therefore you have to reselect the M-Zone after
each re-start.
Control elements:
 Direct access to main menu
 Choose DVD
 Choose DVB-T
 Deactivate M-Zone
Control elements:
 Direct access to DVB-T
 Direct access to M-Zone
 
 

EXTERNAL PLAYBACK AND SOURCES
DVB-T
NOTE:
■ For DVB-T reception you need to connect an external ZENEC DVB-T
receiver. For a perfect compatibility match check out the manual and the
compatibility list in advance.
■ Compatible DVB-T devices offer direct operation via touchscreen of the
headunit.
■ The headunit does not memorize that the DVB-T receiver has been
activated after shutting off. Therefore you have to reselect DVB-T after
each re-start.
Control elements:
 Tap into the upper right corner to
return to the main menu
Control elements:
 Direct access to DVB-T

