User manual

30 31

N C 4 612

SYSTEM SETUP: MAIN / FIRST SETTINGS

Main setup screen:

Settings to attempt after mounting and initial startup:

Set OSD language: Go to Setup>General>Language

to choose your desired OSD

language. Animated picture visualises

your setting.

Set Reverse Camera: Go to Setup>General>Driver Assist

Needs to be enabled to use the

camera. Animated picture visualises

your setting.

Control elements:

 Return to the previous menu.

Works with all four submenus.

 See chapter Setup Video.

 See chapter Setup Audio.

 See chapter Setup General.

 See chapter Setup Misc.





  

SYSTEM

SETUP: IMPORT/EXPORT SYSTEM SETTINGS

Go to Setup>Misc>Help

SYSTEM

NOTE:

■ Make sure the USB flash drive has been FAT32 formatted.

■ Refrain from manually modifying the generated export file. Re-import

relies on proper file integrity.

■ After adding new functions, by means of a system update, they will

always be intialised with standard default values. That compensates for

lacking values from the import file content.

■ After a firmware update, check the update installation instructions for

notes on system settings import and take them into consideration.

1. Connect USB flash drive to device.

2. Tap "OK", at System Settings-Import

option, to launch import.

3. Restart device upon import completion.

Export system settings:

1. Format USB flash drive with FAT32.

2. Connect USB flash drive to device.

3. Tap "OK", at System Settings-Export

option, to launch file export.

Import system settings: