Manualshelf

User manual

ManualsBrandsZENEC ManualsComputer equipmentZE-MR1020-DVD
41424344454647484950
46
Customizing DVD settings
To set the general setup page:
1. Press the SETUP button on the remote control. The DVD setup menu opens.
2. Press the [] / [] buttons to select General setup page, then the list opens.
3. Press the [] / [] buttons to select the desired setting item. The items include
TV DISPLAY, ANGLE MARK, OSD LANG, CAPTIONS and SCREEN SAVER.
4. Press the ENTER button to open the list, then press [] or [] to choose the setting
values.
5. Press the ENTER button to con rm.
6. Press the SETUP button to exit the setup menu.
To set the speaker setup page:
1. Press the SETUP button on the remote control. The DVD setup menu opens.
2. Press the [] / [] buttons to select speaker setup page, then the list opens.
3. Press the [] / [] buttons to select the desired setting item. The items
include DOWNMIX, DUAL MONO and DYNAMIC.
4. Press the ENTER button to open the list, then press the [] or [] buttons to choose the
setting values.
5. Press the ENTER button to con rm.
6. Press the SETUP button to exit the setup menu.
To set the preference page:
1. This setting is only available in stop mode or when no disc in the player.
2. Press the SETUP button on the remote control. The DVD setup menu opens.
3. Press the [] / [] buttons to select preference page, then the list opens.
4. Press the [] / [] buttons to select the desired setting item. The items include TV TYPE,
AUDIO, SUBTITLE, DISC MENU, PARENTAL, PASSWORD and DEFAULT.
5. Press the ENTER button to open the list, then press [] or [] to choose the setting
values.
6. Press the ENTER button to con rm.
7. Press the SETUP button to exit the setup menu.
NOTE:
This icon indicates that it is locked, you can not change the rating (parental control
level).
This icon indicates that it is unlocked. You can change the rating (parental control
level).
PASSWORD: Lets you change the 4-digit password using the number keys
on the remote control. The default password is 3308, but no longer works
after you change the password.
DEFAULT: Resets all settings to the factory defaults.
NOTE:
■ After you input some pictures to the player as LOGO picture, select Captured in LOGO
TYPE menu, then you can use SUBTITEL key on the remote control to change the start
LOGO picture one by one. Select Default in LOGO TYPE menu to recover the default
start LOGO picture.