User manual

29
ZE-MR1020DVD
■ Press the [SRC–] button for 2 seconds when you are in the DVD-mode to reach the SD/
MMC or the USB mode. You can plug it just one medium. When you plug in both, the unit
will  nd no medium.
6. [VOL–] button
■ Press the [VOL–] button to reduce a value in the menu (such as decreasing the volume).
7. [VOL+] button
■ Press the [VOL+] button to increase a value in the menu (such as increasing the volume).
8. Dome Light switch
■ Move to the ON/OFF position, then press it to turn the dome light on or off.
9. [PANEL OPEN] button
■ Press the [PANEL OPEN] button to open the LCD panel.
10. [] button
■ Press the [] button to skip the previous chapter on DVD or track on CD; Press and hold
it to fast reverse playback at 2x, 4x, 8x, 16x and 32x speeds.
11. [] button
■ Press the [] button to skip the next chapter on DVD or track on CD; Press and hold it to
fast forward playback at 2x, 4x, 8x, 16x and 32x speeds.
12. [STOP] button
■ Press the [STOP] button to stop playback, press PLAY or ENTER button to start playing
at the last position.
■ Press the [STOP] button twice to fully stop playback.
■ Press the [PLAY] or [ENTER] button to start playing at the beginning of DVD.
13. [/] button
■ Press the [/] button to play or pause a disc.
14. [EJECT] button
■ Press the [EJECT] button to eject the disc.
15. IR window
■ Receives IR signals from the remote control and sends IR signals to IR wireless
headphone.
16. Fixing holes
■ Connect the player to the mounting plate with screws inserted into these holes.
17. Disc slot
■ Insert the disc into the slot.