Instruction manual

101
ENGLISH
GOTO SEARCH
■ During DVD or VCD playback, perform the following steps to use the GOTO feature to
access a specific location on a disc:
1. Press the “-/--”button on remote control or touch the F Area on the screen to enter
the “GOTO” mode.
2. Press the [5] / [6] buttons on the remote control to select a category.
■ For DVD mode, you can choose Time or Title/ Chapter search.
■ For VCD mode, press the“-/--”button to choose between track search and
exit.
DVD Search
Time – Go to specific time in current title.
Title/Chapter – Go to specific chapter in a title.
VCD Track Search
Time – Go to specific time in the current track.
Track – Go to specific track.
3. Touch the ( )/ (--- / ---) area on the screen to display a numeric keypad on the
touch screen.
4. Enter a time/track number into the field by using the numeric keypad on the remote
control or on the screen.
5. Press the OK button on the remote control or on the touch screen to go to the
specified location on the disc.
6. Press the “-/--”button on the remote control or touch the F Area on the screen again
to exit.
DIRECT CHAPTER/TRACK SELECTION
■ During DVD, VCD and CD playback, you can use the numeric keypad on the remote
control to access a track directly.
VIEWING AN ALTERNATE PICTURE ANGLE (DVD ONLY)
■ Some DVDs contain scenes that have been shot simultaneously from different angles.
For discs recorded with multiple angles, press the (ANGLE) button on the remote control
to toggle available angles of the on-screen image.
Search
Time
Title/Chapter ---/---
--
·
--
·
--
Track Search
Time
Track ---/---
--
·
--
·
--