Instruction manual

12
DEUTSCH
ENGLISH
13
RADIO MODE
SELECT RADIO AS PLAYING SOURCE
■ Open the SOURCE MENU and then touch the RADlO icon.
SELECT ONE RADIO BAND
■ Press the [BAND] key on the display panel or on the remote control or touch the
[BAND] icon on the user interface to select one radio band among FM1, FM2, FM3,
AM1 and AM2.
AUTO TUNING
■ Press the []/[] key on the display panel or on the remote control or touch the []/[]
icon on the user interface to seek a higher/lower station. To stop searching, repeat the
operation above or press other keys having radio functions.
 NOTE:
■ When a station is received, searching stops and the station is played. If the unit receives
a stereo broadcasting, the indicator light of stereo 'ST' on the TFT or on the LCD display
will be lighted.
MANUAL TUNING
■ During manual tuning, the frequency will be changed in steps. Press the []/[] key on
remote control or touch the []/[] icon on the user interface to tune in a higher/lower
station.
■ Touch the numeric keypad icon [
S
] and then touch the numeric buttons to input the
radio station frequency numbers.
AUTO SAVE
■ Only stations with sufficient signal strength will be detected and stored in the memory.
When the monitor is closed, press and hold the [AS/PS] key on the display panel.
■ When the monitor is opened, touch the [AS] icon on the user interface.
■ To stop auto save, press other keys having radio functions.
 NOTES:
■ After auto save, the previous saved stations will be overwritten.
■ The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6
stations; hence the unit can store 30 stations in total.
RADIO MODE
MANUAL SAVE
When one expected radio station has been detected ...
1. Press the [MEM] icon on the user interface and the preset menu will be opened.
2. Press one preset button among P1~P6.
3. lf you want to abort, press the [Exit] button.
PREVIEW SCAN
■ Preview scan searching is such a process that the searching pauses when a station is
received and then played for 5–10 seconds. After being played, the unit continues the
process until the whole band is detected.
■ When the monitor is closed, press the [AS/PS] key on the display panel.
■ When the monitor is opened, touch the [PS] icon on the user interface. To stop the
process, press other keys having radio functions.
RECALL THE STORED STATIONS
■ Press one numeric key among 1 to 6 on the remote control or touch an onscreen station
button to select the corresponding stored station.
LOCAL SEEKING
■ When LOCAL seeking is on, only those radio stations with strong radio signal could be
received.
■ To open or close LOCAL function, press and hold the [NAV] key on the front panel.
 NOTES:
■ When the local radio station searching is on, the indicator light 'LOC' lights up; where as
the light goes off.
■ The number of radio stations that can be received will decrease after the local seeking
mode is on.