Instruction manual

26
DEUTSCH
ENGLISH
27
IPOD MODE
SELECT IPOD AS PLAYING SOURCE
■ The unit will switch to iPod mode automatically when an iPod player is plugged into the
unit.
■ To return to the iPod mode from any other sources, open the SOURCE MENU and then
touch iPod.
MUSIC PLAYBACK
1. Enter iPod music mode
■ Press the [TlTLE] key on the remote control or touch the music icon on the user interface.
2. Select one music le
■ Press the [Left]/[Right] key on the remote control.
3. Play back the music le
■ Press the [Down] key on the remote control or touch the [
] button on the user interface.
4. Return to the previous menu
■ Press the [UP] key on the remote control or touch the button [MENU] on the user interface.
 NOTE:
■ In the Music mode, the buttons on the iPod are disabled.
PHOTO PLAYBACK
1. Enter iPod photo mode
■ Press the [MENU] key on the remote control or touch the picture icon on the user interface.
2. Control photo les playback
■ Use the keys on the iPod to control playback.
 NOTES:
■ To exit PHOTO mode, press the [MENU] button on the iPod.
■ Pictures can be displayed on the screen just when the picture playback mode of iPod
player is set to "slide show".
IPOD MODE
VIDEO PLAYBACK
1. Enter iPod video mode
■ Press the [AUDIO] key on the remote control or touch the video icon on the user interface.
2. Control video les playback
■ Use the keys on your iPod player to control playback.
 NOTES:
■ To exit VIDEO mode, press the [MENU] button on the iPod.
■ To transmit the images (including videos and pictures) from your iPod to the TFT
screen, you must set the following options through the iPod video settings menu:
TV Out = On, TV Signal = NTSC.
FAST PLAYBACK
■ To access fast forward or fast reverse playback, you should press and hold the [Left]/
[Right] key on the remote control or the [
]/[] button on the user interface for
1 second and continue to hold the corresponding key. To resume normal play, release
them.
DIRECT SEARCH
■ To select a le directly, touch the numeric button on the user interface to open the direct
entry menu. Enter the desired le using the number pad of this menu. Touch the [Enter]
button to conrm. To exit this menu, touch the [Exit] button.
■ To clear the numbers you have entered, touch the [Clear] button.
■ You can also use the numeric keys on the remote control to select les directly.