Instruction manual

62 63
ENGLISH
62 63
ENGLISH
USING THE TFT MONITOR
OPEN/CLOSE TFT MONITOR
■ Press the
[ ] button on the front panel or press the [ ] button on the remote control to
open/close the monitor.
TFT MONITOR AUTO OPEN
■ If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically moves
to the last viewing position.
■ If “TFT Auto Open” is ”off” when the unit is turned on, press the
[ ] button on the front
panel or press the [ ] button on the remote control to move the monitor into the desired
viewing position.
MONITOR TILT ANGLE ADJUSTMENT
■ The monitor angle can be adjusted for optimum viewing using one of the following
methods:
■ Press the
[] or [] button on the front panel of the unit to adjust the tilt angle of the
screen one step at a time.
■ Press and hold the [] or [] button to continuously adjust the tilt angle.
REAR CAMERA MODE
■ When the vehicle is put in reverse gear and an optional rear view camera is connected to
the ZE-MC172, the TFT monitor will automatically switch to the camera input source.
IMAGE SETTING
Video Output Format
■ The table below shows the video output format for each playing source.
Playing source Video output format
FM/AM Tuner RGB mode
DVD RGB mode
AUX IN CVBS mode
CAMERA CVBS mode
iPOD (VIDEO) CVBS mode
*CVBS – Composite Video Baseband Signal
ZE-MC172 Manual D+E-CS3.indd 63 06.09.2007 11:14:11 Uhr