Instruction manual

56 57
ENGLISH
56 57
ENGLISH
1. POWER OFF/VOL
■ Rotary encoder. Press the encoder to turn on the unit, press and hold it to turn off.
■ Rotate it clockwise/anticlockwise to adjust the volume.
2. IR REMOTE CONTROL RECEIVER
3. PREVIOUS
4. MUTE
■ Press the MUTE button to mute the volume and press it again to restore the volume.
5. SRC
■ Press the SCR button once to select playing mode.
6. PLAY/PAUSE
■ Press the PLAY/PAUSE button once for play/pause.
7. NEXT
8. DISC SLOT
9. RESET
10. SMART DIAL
■ Rotary encoder. Press the encoder to access the main menu.
■ Rotate it clockwise/anticlockwise to select the desired item and press it once to
access or confirm.
11. EJECT
■ Press the EJECT button once for disc insertion/ejection.
12. INFO
■ DVD mode: Press the INFO button to display playback information on the screen.
■ Press and hold to access the picture setup.
13. ANGLE–
■ Press the ANGLE- button to adjust the downward tilt angle of the screen one step at a time.
■ Press and hold it to continuously adjust the downward tilt.
■ Press it to adjust the picture settings in the picture setup.
14. ANGLE+
■ Press the ANGLE+ button to adjust the upward tilt angle of the screen one step at a time.
■ Press and hold it to continuously adjust the upward tilt.
■ Press it to adjust the picture settings in the picture setup.
15. TFT DISPLAY
16. OPEN
■ Press the OPEN button to activate the automatic mechanical system and move the
TFT monitor into the viewing position.
■ Press it again to close the TFT monitor.
17. DISP
■ Press the DISP button to display system information on the LCD screen.
18. LCD DISPLAY
ZE-MC172 Manual D+E-CS3.indd 57 06.09.2007 11:14:09 Uhr