Operation Manual

7. Enter

This button is used to enter the channel level control in the Set-Up menu.

8. Source Display

By pushing this button, you can display the decoding mode or Pro Logic mode on the monitor or

TV. The following is an explanation of the modes:

• Dolby Digital - Input source is Dolby Digital bitstream for all listening modes

• Pro Logic - Input source is PCM and Pro Logic is on for phantom or surround modes.

• Dolby Surround - Input source is Dolby Digital 2.0 Stereo and Pro Logic is on for phantom and

surround modes.

• PCM - Input source is PCM and Pro Logic is off for all listening modes or input source is PCM

and Pro Logic is on for stereo mode.

9. Volume Up/Down

These buttons control the master volume of the system. These buttons are only for master volume

control. When channel level menu is invoked, these buttons cannot be used for control of channel

levels. Channel levels can be changed using left or right button.

SPEAKER CONNECTION SCHEMATIC

ZE-5.1D Manual E+D 27.02.2004, 14:32 Uhr19