Technical data

6 7
High Performance Navigation System
Accurately navigate via touchscreen: with the E>GOs you can arrive quicker
and more relaxed at the your destination – throughout all of Western and
Eastern Europe.
Select the desired target, choose between various options of route calcula-
tions, and then you’re off: your electronic co-pilot leads you without any
detour to your final destination and also shows you, if desired, relevant
points/P.O.I.s such as gas stations, hotels and restaurants.
A clear graphic map display, where various scales and view modes are avail-
able in 2-D and 3-D, makes navigating so much easier. As you concentrate on
the traffic, the text-to-speech voice guidance leads you through the streets.
The automatic zoom at intersections or roundabouts makes sure that there
is no confusion even at difficult locations. Features such as the tunnel mode,
the driving lane assistant or the realistic 3-D city map or landscape views,
make getting to your desired destination easier – last but not least by using the
highway mode with real signpost rendering, in which the highway signposts are
shown in a realistic way.
TMC/TMC Pro
All E>GOs are fitted with a TMC and TMC Pro receiver, which evaluates the
traffic bulletins and warns you, in good time, of any traffic jams and congestion
on the road. And if you wish, the E>GO can even suggest alternative routes.
Through this you can change your route and avoid any unnecessary delays.
Off the factory the TMC service is functional and free. The TMC Pro function
requires a licence (lifetime) to be separately purchased through Naviextras
(available for Germany, UK and France only).
The E>GO Concept: Car-Specific Naviceivers
A permanently installed sat nav system, that fits optically and technically into
your vehicle? The E>GO range, awarded with two innovationprizes, makes this a
feasible undertaking.
The E>GO range – short for Exchange and Go – offers you perfect fit multime-
dia navigations, that are designed and built precisely for certain types of cars:
for vehicles such as the VW Golf IV platform models, Golf V and VI types, va-
rious models from SEAT, OPEL, FORD, AUDI or HYUNDAI – with further devices
to match to other vehicles to follow...
The immense variety of functions found in these naviceivers, the actuality of
their entertainment and navigation features, the simple usage and the uncom-
plicated mounting are the cornerstones, on which the success of the E>GO
concept is based on.
The high-tech naviceivers work with all modern data media – CD, DVD, USB,
SD, iPod, iPhone – and operate with up-to-date Bluetooth technology from
the undisputed leader Parrot.
Perfect Integration
E>GO naviceivers perfectly integrate into each target vehicle, can be installed in
record breaking time and connect and communicate flawlessly with the data pre-
sent in the on-board CAN net, through the vehicle CAN system. The functionality
of steering wheel controls is kept completely in-sync, just like the output of the
car specific navigation and info data displayed over the driver info displays (in
accordance to each vehicle model). On top of that, the front panel design is spe-
cifically tailored to match with the interior style of the different target vehicles:
From the colours of the key illumination to the design and style of the control
panel assembly.
Installation Friendly Main Concept
The installation of an E>GO is absolutely straightforward: Simply connect the navi-
ceiver to the main plug of your car, plug in the FM and GPS antenna leads and you
can then mount the E>GO into the radio slot of the center console.
The E>GO is connected to the vehicles on-board data net using a so called CAN/
Stalk interface. This interface – part of the delivery scope of E>GO units (except
ZE-NC2040) – plugs into the backside of the main unit and electrically integrates
E>GO units into the data communication net of your vehicles. Factory-installed
steering wheel remote controls always stay functional.
Connection to the Steering Wheel Remote Control
A/V functions of the E>GO naviceivers (except ZE-NC2040) are connected to the
steering wheel remote control using a CAN/Stalk interface, through the vehicle
specific CAN net. Each A/V source (radio, MP3, USB), including Bluetooth hands-
free functions, can then easily be controlled – ex factory – via the steering wheel
remote control.
Connection to the Driver Info Display
The ZE-NC2010 supports the multifunctional driver information display MFD+, that
is connected to the CAN-Bus. The on-board computer of the vehicle as well as the
driver info display (TID, BID, GID, CID) in OPEL cars can be connected to the
ZE-NC5010, and allow to be controlled via the naviceiver's touchscreen display.
ZE-NC5010 for OPEL
MFD+ in VW Golf IV GID in OPELSteering wheel remote control in VW Steering wheel remote control in OPEL
www.zenec.naviextras.com
To make sure that you are always
up-to-date with the E>GO, there
are many possibilities to update the
device’s software via USB interface.
Even the system software is up-
datable, as well as the Parrot Blue-
tooth module firmware – so that the
E>GOs stay compatible with new
mobile phone models to appear in
the future.
Main system software and
Bluetooth updates can be
downloaded from the internet
at www.zenec.com (menu
item “Support“).
www.zenec.com
You can update the E>GO content package, expand the navi-section with
additional maps, or download the newest 3-D city maps using the website
www.zenec.naviextras.com anytime, even in the middle of the night or abroad
during a journey. This online portal makes it easier than ever before to keep your
navigation system up-to-date and individually put new features and functions
together.
Download options: Map updates; extra maps and P.O.I. databases of more than
60 countries worldwide; additional 3-D places of interest and 3-D terrain data;
free bugfixes for the Tele Atlas based digital map data.
Topographic 3-D map representation3-D landscape or 3-D city map views Blend poor colours in the night mode
Announcement of all traffic events Split screen modePremium P.O.I. database
Real signpost rendering
Trip computer
Automatic smart zoom function
ZE-NC3810 for FORD
E>GO – Updates secure the Future
Navigation Features
•
•
Pre-installed map data
for 43 Eastern and
Western European
countries
TMC and TMC Pro
receivers (TMC Pro
licence optional)
•
•
Voice guidance
and menu in
28 languages
Destination entry via
address, postal code,
P.O.I., latitude and
longitude, saved/last
found destinations
•
•
•
TTS Text-to-Speech
function (announce-
ments of street names)
Map displays switchable
from 2-D to 3-D
landscape and 3-D city
map
Highway mode with real
signpost rendering
•
•
•
•
Smart-zoom function
at intersections and
turn-offs
Traffic lane assistant
Tunnel mode
Splitscreen mode:
navigation within the
chosen A/V menus
•
•
Distance displayed
during route guidance
(distance/time)
Extensive premium
P.O.I.-database,
selection from current
position, destination, on
the planned route
• Trip computer:
configurable display of
three additional pieces
of information, with the
choice of arrival time,
journey time, speed,
direction, height above
sea level, etc.
•
•
•
4 GB internal NAND
storage for navigation
software – the SD slot
remains avialable for
A/V usage
Updates through
Naviextras
External GPS and TMC/
TMC Pro receivers
included