Operation Manual

3.1.1.2 Smart Search - Navigating to a city/town
To navigate to a city or town in Smart Search without knowing an exact address or Place,
simply set the search centre to the city or town you want to visit and without entering anything
into the input field, do as follows:
1. Tap
. The centre of the selected city or town is now set as your
destination.
2. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the
new location. Tap
to confirm the destination, or tap
to select a different destination.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
Note!
The alternative way to search for an address is to tap the
button inFind
menu. Unlike the Combined Search, this alternat
ive search method is a structured
one where you can define the parts of the address separately. Search for the city
or town and then tap
.
3.1.1.3 Smart Search - Navigating to an intersection
To find an intersection in Smart Search, carry out the search as described earlier but use the
'&' sign to separate the two intersecting streets. You do not need to use spaces before and
after the separator character. For example you can use any of the following input texts to find
the intersections of Collins Street and Douglas Avenue (the more precise the input string the
fewer false results are expected):
• Collins St & Douglas Ave
• Collins & Douglas
• Coll St & Dou Av
• Col&Doug
• C&D
29