User's Manual
Table Of Contents
- Device Overview
- Charging and Battery
- Getting Started
- Sensor Flight Mode
- Keeping the Sensor Lens Clean
- Requirements
- Disclaimers
- Responsible Use
- Care and Maintenance
- Changes and Modifications
- Batteries
- Charging
- Prolonged Heat Exposure
- Choking Hazard
- Radio Frequency Radiation Exposure
- Regulatory Information
- Disposal and Recycling
- Disclaimers
- Support
© 2020 Zen-Me Labs Ltd. Zen-Me is patented and trademark of Zen-Me Labs Ltd.
PAGE 11
↑ GO TO CONTENTS
Press power button once to deactivate Flight Mode.
Ensure the sensor lens is always clean and free from blockages.
2 long (2 second) ashes indicate that Flight Mode is turning o.
Once ight Mode is switched o you can connect the app with sensor again.
Turning o Flight Mode
Keeping the Sensor Lens Clean
You can use Flight Mode to save battery on your sensor, if you will not connect your sensor for long time. This will shut down the
Bluetooth Radio but keeps the sensor operating. Once you return you can activate the radio by turning the ight mode o and connect to
your sensor again.
The sensor lens takes measurements from the sensor’s surroundings and continually provides internal instruments with information.
The sensor lens must always be kept free from water, liquids, dust or other particles. Blocked holes in the sensor lens could aect the
performance of your sensor.
NOTICE
NOTICE