Instruction manual

67ZVC315-001_v02
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Structure of device
1
Outlet lter cover
2
A hook for mounting sucker-brush sweeper or telescopic
tube
3
A plug with power connecting cable
4
On/Off button and simultaneously a knob for suction
power control
5
Dust bin full indicator “CYCLONE”
6
Cable retractor button
7
An attach to unlock the dust bin “CYCLONE”
8
A handle for carrying vacuum cleaner
9
A bolt – mechanical suction power regulator
10
Suction hose
11
Telescopic suction tube with a fastening hook
12
Outlet lter “Microlter” (mounted in a vacuum cleaner)
13
Foam exhaust lter (mounted in vacuum cleaner,
in exhaust lter cover)
14
Inlet lter (mounted in dust container “CYCLONE”).
Vacuum cleaner is equipped in one lter only (A or B)
A
Inlet lter EPA (mounted in vacuum cleaner
ZVC315SK)
B
Inlet lter HEPA H13 (mounted in vacuum cleaner
ZVC315HP)
15
Foam inlet lter (mounted in dust container) “CYCLONE”,
in the inlet lter HEPA/EPA frame
A
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A. Does
not cause interferences with audio/video devices.
Does not require grounding .
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
– Electrical equipment designed for use within specic
voltage limits (LVD) – 2006/95/EC.
– Electromagnetic compatibility (EMC) – 2004/108/EC.
The device meets the requirements of Commission
Regulation (EU) No. 666/2013 on implementing the Directive
of the European Parliament and of the Council 2009/125/EC
with regard to eco-design requirements for vacuum cleaners.
The device complies with the requirements of the
Commission Delegated Regulation (EU) No. 665/2013
supplementing Directive of the European Parliament and of
the Council 2010/30/EU with regard to energy labelling of
vacuum cleaners.
Noise level: 77 dB(A).
This vacuum cleaner has a dust bin “CYCLONE” with
cyclone ltration, which allows vacuuming without the use of
a traditional bag. A characteristic feature of the cyclone lter
is the use the phenomenon of turbulence of air stream for
separating xed impurities. Separation of impurities occurs
in the container part of circular cross section, in which the
rotating air moves the pollutions on the wall of the container.
The initially puried air is targeted to the foam inlet lter
and washable HEPA/EPA inlet lter. For washable inlet
lter HEPA/EPA was used a special ltering material, which
allows to rinse the lter with running water after its dirty, and
reuse of the lter.
VERSIONS OF ZVC315 VACUUM CLEANERS
Styling
option and
equipment
Version
Adjusting the suction power
Tank full indicator “CYCLONE”
Protection against lack of
HEPA/EPA inlet lter
Inlet lter
Suction tube
Sucker-brush sweeper
Small nozzle sucker
Gap sucker
Small brush sweeper
"BNB" Parquet brush sweeper
1 2 3 4 5 6 7 8 9 10 11
ZVC315HP + + + HEPA H13 Telescopic + + + + +
ZVC315SK + + + EPA Telescopic + + + + –