User manual
28 GW24-007_v01
HANDLING
1. Select the airow direction upwards or a bit down-
wards (B) untighten the leaning adjustment knob
(13) and set the best angle of head leaning – air-
ow. Tighten the knob (13).
2. Insert supplying cord (15) into mains supply outlet.
3. Switch on selected ro-
tation speed pressing
rotation button (14): 1,
2 or 3. You can change
rotation speed during
fan operation.
4. To switch on/off fan head oscillate (A), press in/pull
out the button (12).
5. Press the on/off „0” button to switch off the fan.
CLEANING
Make sure to unplug from the electrical supply source before cleaning. –
Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Thoroughly to re- –
move soap lm with clean water.
Dry thoroughly; make sure that water or other liquid did not get inside of motor. –
ECOLOGY – ENVIRONMENT PROTECTION
Each user can protect the natural environment. It is neither difcult nor expensive.
In order to do it: put the cardboard packing into recycling paper container; put the
polyethylene (PE) bags into container for plastic.
When worn out, dispose the appliance to particular disposal centre, because of the
dangerous elements of this appliance, which can be hazardous for natural environ-
ment.
Do not dispose into the domestic waste disposal!!!