Operation Manual

108 HC1002-001_v01
3
Insert the adaptor plug into a suitable mains supply outlet (see the rating plate on the
adaptor).
– Charging of the battery used in the appliance takes approximately 90
minutes.
– The charging process may be terminated earlier than 90 minutes by the
overcharge protection circuit.
– The charging process may be terminated earlier than 90 minutes by the
overcharge protection circuit.
– When the battery is fully charged, the battery percentage status shows
100 and the LCD screen glows blue.
Unplug the adaptor from the mains after charging.
●
To unplug the adaptor, never pull on the power cord as this may damage
the unit. Hold the adaptor rmly and pull it out of the power outlet.
A fully charged appliance has a cordless operating time of up to 50
minutes.
CHARGING WITH THE CHARGING STAND
Charging in horizontal position
Check if the appliance is OFF.
●
1
Insert the adaptor connector into the charging port on the stand.
To prevent damage to the appliance, make sure the charging port is dry
before inserting the adaptor connector.
2
Place the appliance (without any attachments) on the charging stand. Make sure the
charging port on the appliance rests safely on the charging connector on the stand.
3
Connect the adaptor plug into a suitable mains supply outlet (see the rating plate on
the adaptor).
– Charging of the battery used in the appliance takes approximately 90
minutes.
– The charging process may be terminated earlier than 90 minutes by the
overcharge protection circuit.
– When charging, the current battery level is displayed graphically and
numerically (in percentage) and the power indicator light is on.
– When the battery is fully charged, the battery percentage status shows
100 and the LCD screen glows blue.
C