Operation Manual

105HC1002-001_v01
Tip
Product information user instructions
This appliance is intended for domestic use. The warranty conditions change if the
●
product is used for commercial purposes.
This appliance is suitable for mains and battery power supply.
●
Always wash and comb your hair before cutting, making sure it is tangle free
●
and dry.
Place a towel around the neck and shoulders to prevent hair from getting behind the
●
clothing.
Use the appliance only for its intended use, as described in this manual.
●
For additional protection, it is recommended to install a residual current
device on the mains with rated operating current not exceeding 30 mA.
For further information, please contact a qualied electrician.
Technical specication
Technical specications are given on the nameplate.
The charging adaptor is a Class II electrical device and does not require grounding .
ZELMER hair clippers satisfy the requirements of relevant standards.
This appliance complies with Commission Regulation (EC) no. 1275/2008 on eco-design
requirements.
The appliance complies with the following directives:
Low Voltage Device (LVD) – 2006/95/EC. –
Electro-Magnetic Compatibility (EMC) – 2004/108/EC. –
Noise level (LWA): 57 dB/A.
The product is marked with CE symbol on the nameplate.
Barter: Ni-MH, 1000 mA. Battery voltage 2.4 V. Standard charging time: 90 minutes.
Operating temperature range: 0-40°C.