Operation Manual

60
CAUTION: To ensure additional protection we advise you to install a residual current device (RCD) in the bathroom’s electrical
circuit with the rated amperage not exceeding 30 mA. In order to do so please contact a qualified electrician.
WARNING: Do not use this appliance near water, bathtub, pool or other water tank.
WARNING: Follow these safety instructions to avoid the risk of burns, electric shock or fire.
Safety instructions:
This hair dryer is equipped with an overheating protection device which turns off the appliance when the temperature of the
outflow air is too hot or when the air inlet is partly blocked. If the hair dryer switches off during operation please switch off all
buttons and allow to cool. The protection device will then automatically reset. Before using check if air inlet and outlet is not
blocked. If necessary unplug the appliance and clean the openings. While using the appliance do not block the openings and do
not allow hair to get inside the hair dryer.
Technical parameters
The technical parameters are indicated on the rating label.
ZELMER hair dryer fulfills the requirements of the existing norms.
The appliance is in conformity with the requirements of the directives:
- Low voltage appliance (LVD) – 2006/95/EC.
- Electromagnetic compatibility (EMC) – 2004/108/EC.
The appliance was marked by the CE sign on the rating label.
The CE conformity declaration is available on www.zelmer.pl.