Specifications

5
HDS4x2 User Guide, Rev 1.1, 08-31-07
Getting Started (Quick Reference)
Using the audio / video breakaway feature (continued)
To switch only the video channels of a zone (video breakaway):
Press the audio / video breakaway selection button
4
until only the BLUE LED is lit
6
, or press the
VID
button on the remote control.
Following the instructions for “Mapping an input to an output zone”. When only the BLUE LED is lit, only
the video channels will change when mapping an input to an output zone.
To switch both the audio and video channels of a zone (normal operation):
Press the audio / video breakaway selection button
4
until the RED and the BLUE LEDs are lit
5
and
6
, or press the
A/V
button on the remote control.
Following the instructions for “Mapping an input to an output zone”. When both the RED and the BLUE
LEDs are lit, both the Audio and Video channels will change when mapping an input to an output zone.
Sequencing through inputs
To sequence a zone through its inputs you must use the remote control.
Press the
SQ1
button to sequence Zone 1 through the four inputs.
Press the
SQ2
button to sequence Zone 2 through the four inputs.
You can sequence through a zone’s inputs whether or not it’s selected.
Mapping an input to an output zone using the remote control’s direct select buttons
You can map any input to any output zone with the press of a single button on the remote control.
To map an input to Zone 1, press
1 ►1
-
4 ►1
on the remote.
To map an input to Zone 2, press
1 ►2
-
4 ►2
on the remote.
The rst number on the remote control’s button represent the input, the number after the arrow represents the
zone. For instance
3 ►1
maps Input 3 to Zone 1, while
4 ►2
maps Input 4 to Zone 2.
The buttons
5 ►2
-
8 ►2
have been redened for the HDS4x2 and allow mirrored outputs by mapping the Inputs
1 through 4 to both Zones.
To map Input 1 to Zones 1 & 2, press
5 ►2
on the remote.
To map Input 2 to Zones 1 & 2, press
6 ►2
on the remote.
To map Input 3 to Zones 1 & 2, press
7 ►2
on the remote.
To map Input 4 to Zones 1 & 2, press
8 ►2
on the remote.
1.
2.
1.
2.