Specifications

HDS4x2 User Guide, Rev 1.1, 08-31-07
4
Getting Started (Quick Reference)
Turning the HDS4x2 on or off
To toggle the power on the HDS4x2 press the power toggle button
1
, or the button on the remote
control.
To power on the HDS4x2, you can press the
ON
button on the remote control.
To power off the HDS4x2, you can press the
OFF
button on the remote control.
Pressing any button on the front panel, or most buttons on the remote control will also power on the HDS4x2.
Mapping an input to an output zone
1 2 3 4 B/A
HDS4x2
 
To map any input to any zone (output):
Select the zone or zones to be mapped by pressing one or both of the zone buttons
3
, or pressing the
O1
and
O2
buttons on the remote control. When a zone is selected the zone’s LED will ash (allowing
the selection to be seen easily from across the room) and its decimal point will light up. By pressing a
ashing zone’s button again, you can unselect the zone.
Once a zone (or zones) have been selected, pressing an input button
2
, or pressing the buttons
1
-
4
on the remote control, maps the chosen input to the selected zone(s). The zone LED(s) will stop
ashing, but will remain selected, (the decimal point will remain lit). To remap the currently selected
zone(s) to a different input, simply press another input button.
Using the audio / video breakaway feature
1 2 3 4 B/A
HDS4x2
 
The HDS4x2 has an audio / video breakaway feature that allows the audio and video signals to be switched
independent of each other.
To switch only the audio channels of a zone (audio breakaway):
Press the audio / video breakaway selection button
4
until only the RED LED is lit
5
, or press the
AUD
button on the remote control.
Following the instructions for “Mapping an input to an output zone”. When only the RED LED is lit, only
the audio channels will change when mapping an input to an output zone.
1.
2.
1.
2.
3
2
Select input Select zone
1
Toggle power
3
2
Select input Select zone
1
Toggle power
4
65
Toggles breakaway modes
BLUE indicates video switchingRED indicates audio switching
4
65
Toggles breakaway modes
BLUE indicates video switchingRED indicates audio switching