User manual

-10-
4. Loading DVDs into the DVD Changer
Note: VideoReQuest will only work with DVD movies. Even though your changer
may support other discs including SACD and audio CDs, the VideoReQuest has been
designed as the ultimate movie player and will not display these discs.
4.1 Adding New DVDs
Every DVD changer has its own method of loading discs. For example, the Sony DVP-
CX777ES Changer requires the discs to be loaded with the label to the right. It is
recommended to load discs starting on Slot #1 of every changer. Spin the knob on the Sony
Changer to move the disc position to add more discs (please refer to Sony Owners Manual).
When you are done adding the DVDs, close the DVD changer door and the VideoReQuest will
start checking all the DVDs added. You can check the number of discs and compare with the
number of free slots to see if any discs are not identified as a DVD by VideoReQuest, including
DVDs put in the wrong direction.
4.2 Ejecting and Changing DVDs
To remove a specific DVD, navigate to the DVD (see Chapter 5) and press the EJECT button on
the VideoReQuest remote. An Alert window will tell you which changer to press eject and line
up the disc position.
When changing discs, it is recommended to first remove the discs and close the DVD changer
door allowing the VideoReQuest to register the removed discs. When the DVD changer
completes its cycle, you can then open the changer to add additional DVDs. Removing a disc
and putting a different disc in the same position will not register correctly on the
VideoReQuest and will not reflect the change until the next scheduled lookup. See Chapter
3.2.1 for more information about scheduling DVD lookups.