Technical data

96 Description
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
14 Yellow indicator lamp
– Lights when the main lamp has failed. The backup lamp is on.
– Blinks when the backup lamp has failed.
15 Green indicator lamp
Lights when the respective light source has been switched on.
16 Selector:
Note:
If two lamp housings are available, you can set the selector switch in
such a way
– that one light source each can be switched on/off on the left-hand
and right-hand side of the foot control panel,
– or that both light sources can be switched on/off on the left-hand
or right-hand side of the foot control panel.
17 Brightness control
You can adjust the brightness using the two control keys on the control
panel.
Note:
If the suspension system has two lamp housings, you can also adjust
the brightness of lamp 1 by pressing the appropriate button on the foot
control panel.
The light source is off.
The light source is on.
The light source can be switched on/off on the left-hand side
of the foot control panel.
The light source can be switched on/off on the right-hand
side of the foot control panel.