Technical data

88 Description
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
5 Counter
The counter records the service hours of the xenon lamp in the Su-
perlux Eye light source.
• Change the xenon lamps after about 500 hours of operation to avoid
any explosion of the xenon lamps. Then reset the counter to "0" by
pressing reset button (6).
6 Reset button
The reset button resets the service hour counter to "0".
7 Opening the lamp module
When you press this button, the lamp module is slightly ejected.
• For changing the lamp, pull out the lamp module as far as it will go.
Turn knob (2) through 180° until it snaps in. This moves the backup
lamp into the illumination beam path.