Technical data

64 Description
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Controls, displays, connections
1 Securing screw
– Prevents the coupling on the suspension arm from coming loose.
2 X-Y coupling
3 Reset button
– Recenters the X-Y coupling.
– Resets the focus to its initial position in the focusing range
Note:
Press this button to start the recentering movement. To stop this
movement, press the button again.
You can also stop the recentering movement by briefly tipping on one
of the buttons on the foot control panel.
4 Cable and light guide clip
5 Support arm with tilt device
6 Knob
for setting the tilt angle of the surgical microscope;
+90° in the direction of the surgeon,
-90° in the opposite direction.
7 Arrows indicating the focusing range
If the dot is located between the two arrow tips, the focusing system
of the surgical microscope is in its starting position.