Technical data

42 Safety
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Manual function
1 Manual button
The Manual button permits you to switch to manual operation. The
motorized functions of the surgical microscope are deactivated. The
lamp brightness is automatically adjusted to a default setting. This
lamp brightness value is displayed in the first display field.
When you have switched to the manual mode, the yellow LED is lit
and the blinking text "MANUAL" appears in the third display field
The surgical microscope can no longer be operated via the foot control
panel, the handgrips or the control and display panel.
In the manual mode, you can use the foot control panel only to switch
the light source on and off, and you can unlock the magnetic brakes
by pressing the button on the microscope.
The manual mode is retained even if you switch the system off and
back on at the power switch.
Press the Manual button a second time to reactivate electronic control.
The basic mode is displayed again on the display and control panel.