Technical data

156 Preparations
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Warning!
It may happen that no second lamp module such as the VISULUX™ fiber
slit lamp is used on the microscope.
To prevent light guide (3) provided for this purpose from injuring the pa-
tient, you must attach it to the cable holder of the suspension system.
• Switch off the illumination system for the unneeded light guide by set-
ting the illumination selector switch (4) to the left.
• Press the light guide into an empty position of cable holder (2).
• Remove cap (1) from the light guide. This prevents melting of the cap
in case the second illuminator is switched on by mistake.